Per citar aquest document: http://ddd.uab.cat/record/145681
Environmental and geometric optimisation of cylindrical drinking water storage tanks
Sanjuan Delmás, David (Universitat Autònoma de Barcelona. Institut de Ciència i Tecnologia Ambientals)
Gabarrell Durany, Xavier (Universitat Autònoma de Barcelona. Institut de Ciència i Tecnologia Ambientals)
Rieradevall, Joan (Universitat Autònoma de Barcelona. Institut de Ciència i Tecnologia Ambientals)
Hernando-Canovas, Elena (Universitat Politècnica de Barcelona. Departament d'Enginyeria de la Construcció)
Pujadas, Pablo (Universitat Politècnica de Barcelona. Departament d'Enginyeria de la Construcció)
De la Fuente, Albert (Universitat Politècnica de Barcelona. Departament d'Enginyeria de la Construcció)
Josa Garcia-Tornel, Alejandro (Universitat Politècnica de Catalunya. Departament d'Enginyeria, Terreny, Cartogràfica i Geofísica)

Data: 2015
Resum: Purpose: Urban water cycle construction processes are an important element to consider when assessing the sustainability of urban areas. The present study focuses on a structural and environmental analysis of cylindrical water tanks. The goal is to optimise cylindrical water tanks from both an environmental (environmental impacts due of life cycle assessment (LCA)) and a geometric perspective (building material quantities for construction purposes depending on the tank characteristics). Methods: A sample of 147 cases was defined based on different positions (buried, superficial and partially buried), dimensions (combinations of heights and radii) and storage capacities (between 100 and 10,000 m3). A structural analysis was conducted for a defined set of cases to determine the quantities of steel and concrete required for its construction. The environmental impacts of the entire life cycle were assessed through a life cycle assessment (LCA). Additionally, environmental standards (the less impactful option for each dimension assessed: geometry, storage capacity and position) defined in the study were applied to realistic cases to evaluate potential environmental savings. Results and discussion: The LCA shows that materials are the main contributor to environmental impacts (more than transport, installation and end of life cycle stages). For this reason, the results of the structural and environmental assessments coincide. Taller water tanks have shown to be less impactful (60 to 70 % less impact for a 10. 000-m3 tank). Regarding the position, superficial water tanks have shown to have between 15 and 35 % less impact than buried ones. The environmentally preferred water storage capacity is between 1000 and 2500 m3, being between 20 and 40 % less impact. For instance, an 8000-m3 tank would emit 1040 t of CO2 eq. Applying the environmental standards 170. 5 t of CO2 eq could be saved (16 % of the total amount). Conclusions: The results of this study show that among the cases analysed, superficially positioned cylindrical water tanks of 8. 5 m in height and of between 1000 and 2500 m3 in storage capacity present fewer impacts. The use of these standards in municipal water tanks construction projects may significantly reduce environmental impacts (10 to 40 %) in all impact categories.
Nota: Número d'acord de subvenció MICINN/2010-20789-C04-01
Nota: Número d'acord de subvenció AGAUR/2014/SGR-1412
Drets: Tots els drets reservats
Llengua: Anglès
Document: article ; recerca ; acceptedVersion
Matèria: Lyfe cycle assessment ; Water supply ; Water tank ; Urban water cycle ; Sustainability ; Structural design ; Construction ; Supply network
Publicat a: The International journal of life cycle assessment, Vol. 20, issue 12 (Desember 2015) , p. 1612-1624, ISSN 0948-3349

DOI: 10.1007/s11367-015-0963-y


Disponible a partir de: 2016-12-31
Post-print
36.5 KB

El registre apareix a les col·leccions:
Documents de recerca > Documents dels grups de recerca de la UAB > Centres i grups de recerca (producció científica) > Enginyeries > Sostenibilitat i Prevenció Ambiental (Sostenipra)
Documents de recerca > Documents dels grups de recerca de la UAB > Centres i grups de recerca (producció científica) > Ciències > Institut de Ciència i Tecnologia Ambientals (ICTA)
Articles > Articles de recerca
Articles > Articles publicats

 Registre creat el 2016-01-25, darrera modificació el 2016-07-15



   Favorit i Compartir