|
|
|||||||||||||||
|
Cerca | Lliura | Ajuda | Servei de Biblioteques | Sobre el DDD | Català English Español | |||||||||
| Pàgina inicial > Articles > Articles publicats > Broadband UHF-RFID passive tag based on split-ring resonator (SRR) and T-match network |
| Data: | 2018 |
| Resum: | A novel broadband design of a planar passive UHF-RFID tag based on a split-ring resonator (SRR) antenna and the T-match network is presented in this work. The radiation properties of the SRR working at its second resonance are exploited to design a radio frequency identification (RFID) tag for the first time. The potential usefulness of the T-match based design methodology to achieve perfect matching between the SRR antenna and any typical RFID chip is demonstrated. A 0. 23 λ₀ × 0. 23 λ₀ tag has been fabricated. The measured read range is higher than 13 m within the whole UHF-RFID band with a peak value of 16 m at 915 MHz. |
| Ajuts: | Ministerio de Economía y Competitividad TEC2016-75650-R Ministerio de Economía y Competitividad TEC2013-40600-R Agència de Gestió d'Ajuts Universitaris i de Recerca 2014/SGR-157 |
| Drets: | Aquest material està protegit per drets d'autor i/o drets afins. Podeu utilitzar aquest material en funció del que permet la legislació de drets d'autor i drets afins d'aplicació al vostre cas. Per a d'altres usos heu d'obtenir permís del(s) titular(s) de drets. |
| Llengua: | Anglès |
| Document: | Article ; recerca ; Versió acceptada per publicar |
| Publicat a: | IEEE antennas and wireless propagation letters, Vol. 17, Issue 3 (March 2018) , p. 517-520, ISSN 1536-1225 |
Postprint 4 p, 1.5 MB |