Web of Science: 71 citas, Scopus: 78 citas, Google Scholar: citas
A universal strategy for metal oxide anchored and binder-free carbon matrix electrode : a supercapacitor case with superior rate performance and high mass loading
Zhang, Xuan (KU Leuven. Department of Materials Engineering)
Luo, Jiangshui (KU Leuven. Department of Materials Engineering)
Tang, PengYi (Institut Català de Nanociència i Nanotecnologia)
Ye, Xiaoliang (Xiamen University. College of Chemistry and Chemical Engineering)
Peng, Xinxing (Xiamen University. College of Chemistry and Chemical Engineering)
Tang, Haolin (Wuhan University of Technology. State Key Laboratory of Advanced Technology for Materials Synthesis and Processing)
Sun, Shi-Gang (Xiamen University. College of Chemistry and Chemical Engineering)
Fransaer, Jan (KU Leuven. Department of Materials Engineering)

Fecha: 2017
Resumen: Despite the significant advances in preparing carbon-metal oxide composite electrodes, strategies for seamless interconnecting of these two materials without using binders are still scarce. Herein we design a novel method for in situ synthesis of porous 2D-layered carbon–metal oxide composite electrode. Firstly, 2D-layered Ni-Co mixed metal-organic frameworks (MOFs) are deposited directly on nickel foam by anodic electrodeposition. Subsequent pyrolysis and activation procedure lead to the formation of carbon–metal oxides composite electrodes. Even with an ultrahigh mass loading of 13. 4 mg cm, the as-prepared electrodes exhibit a superior rate performance of 93% (from 1 to 20 mA cm), high capacitance (2098 mF cm at a current density of 1 mA cm), low resistance and excellent cycling stability, making them promising candidates for practical supercapacitor application. As a proof of concept, several MOF derived electrodes with different metal sources have also been prepared successfully via the same route, demonstrating the versatility of the proposed method for the preparation of binder-free carbon–metal oxide composite electrodes for electrochemical devices.
Nota: Financial support from China Fund KU Leuven (ISP/13/02SJT) is acknowledged. J. Luo acknowledges the Research Foundation – Flanders (FWO) for FWO Postdoctoral Fellowship (12F5514N), a Research Grant (Project number: 1529816N) and a travel grant (V410316N) for a Visiting Professorship in Technical University of Denmark. X. Zhang is grateful to the China Scholarship Council. We thank Prof. Dirk De Vos (KU Leuven) for technical discussions, Prof. Lei Li (Shanghai Jiao Tong University) for providing nickel foams and Prof. Qingfeng Li (Technical University of Denmark) for assistance in TEM measurements. Appendix A
Derechos: Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, i la comunicació pública de l'obra, sempre que no sigui amb finalitats comercials, i sempre que es reconegui l'autoria de l'obra original. No es permet la creació d'obres derivades. Creative Commons
Lengua: Anglès.
Documento: article ; recerca ; acceptedVersion
Materia: Anodic electrodeposition ; Carbon-metal oxide composite materials ; Metal-organic frameworks ; Supercapacitors
Publicado en: Nano Energy, Vol. 31 (Jan. 2017) , p. 311-321, ISSN 2211-2855

DOI: 10.1016/j.nanoen.2016.11.024


Post-print
1 p, 95.7 KB

El registro aparece en las colecciones:
Documentos de investigación > Documentos de los grupos de investigación de la UAB > Centros y grupos de investigación (producción científica) > Ciencias > Institut Català de Nanociència i Nanotecnologia (ICN2)
Artículos > Artículos de investigación
Artículos > Artículos publicados

 Registro creado el 2018-07-25, última modificación el 2019-08-27



   Favorit i Compartir