Google Scholar: cites
Solution-Processed Ultrathin SnS2-Pt Nanoplates for Photoelectrochemical Water Oxidation
Zuo, Yong (Institut de Recerca en Energia de Catalunya)
Liu, Yongpeng (École Polytechnique Fédérale de Lausanne)
Li, Junshan (Institut de Recerca en Energia de Catalunya)
Du, Ruifeng (Institut de Recerca en Energia de Catalunya)
Yu, Xiaoting (Institut de Recerca en Energia de Catalunya)
Xing, Congcong (Institut de Recerca en Energia de Catalunya)
Zhang, Ting (Institut Català de Nanociència i Nanotecnologia)
Yao, Liang (École Polytechnique Fédérale de Lausanne)
Arbiol i Cobos, Jordi (Institut Català de Nanociència i Nanotecnologia)
Llorca, Jordi (Universitat Politècnica de Catalunya. Departament d'Enginyeria Química)
Sivula, Kevin (École Polytechnique Fédérale de Lausanne)
Guijarro, Néstor (École Polytechnique Fédérale de Lausanne)
Cabot, Andreu (Institut de Recerca en Energia de Catalunya)

Data: 2019
Resum: Tin disulfide (SnS ) is attracting significant interest because of the abundance of its elements and its excellent optoelectronic properties in part related to its layered structure. In this work, we specify the preparation of ultrathin SnS nanoplates (NPLs) through a hot-injection solution-based process. Subsequently, Pt was grown on their surface via in situ reduction of a Pt salt. The photoelectrochemical (PEC) performance of such nanoheterostructures as photoanode toward water oxidation was tested afterwards. Optimized SnS -Pt photoanodes provided significantly higher photocurrent densities than bare SnS and SnS -based photoanodes of previously reported study. Mott-Schottky analysis and PEC impedance spectroscopy (PEIS) were used to analyze in more detail the effect of Pt on the PEC performance. From these analyses, we attribute the enhanced activity of SnS -Pt photoanodes reported here to a combination of the very thin SnS NPLs and the proper electronic contact between Pt nanoparticles (NPs) and SnS .
Ajuts: Ministerio de Economía y Competitividad ENE2016-77798-C4-3-R
Ministerio de Economía y Competitividad ENE2017-85087-C3
Ministerio de Economía y Competitividad ENE2015-63969-R
Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-128
Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-327
Ministerio de Economía y Competitividad SEV-2013-0295
Drets: Tots els drets reservats.
Llengua: Anglès
Document: Article ; recerca ; Versió sotmesa a revisió
Matèria: Tin disulfide ; Two-dimensional material ; SnS2−Pt heterostructures ; Photoanode ; Photoelectrochemical water oxidation
Publicat a: ACS applied materials & interfaces, Vol. 11, Issue 7 (February 2019) , p. 6918-6926, ISSN 1944-8252

DOI: 10.1021/acsami.8b17622
PMID: 30694646


Preprint
22 p, 1.8 MB

El registre apareix a les col·leccions:
Documents de recerca > Documents dels grups de recerca de la UAB > Centres i grups de recerca (producció científica) > Ciències > Institut Català de Nanociència i Nanotecnologia (ICN2)
Articles > Articles de recerca
Articles > Articles publicats

 Registre creat el 2020-02-06, darrera modificació el 2022-11-05



   Favorit i Compartir