Double-stub loaded microstrip line reader for very high data density microwave encoders
Herrojo, Cristian (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Paredes, Ferran (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Martín, Ferran, (Martín Antolín) (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)

Data:	2019
Resum:	Compact and high-data density microwave encoders useful for motion control and near-field chipless radio frequency identification (chipless-RFID) applications are proposed in this paper. The encoders are chains of metallic strips etched on a dielectric substrate. The reader consists of a microstrip line loaded with a pair of identical open-ended folded stubs located at different positions and oriented face-to-face by their extremes. By displacing the encoder over the extremes of the stubs, interstub coupling arises when a strip is located on top of the stubs, thereby generating two transmission zeros (rather than one) in the frequency response of the line. Thus, the presence of a strip on top of the face-to-face stubs produces a variation in the transmission coefficient of the line, which in turn can be detected by feeding the line with a harmonic signal, conveniently tuned. Encoder motion generates an amplitude modulated (AM) signal at the output port of the line with peaks, or dips, separated by a time distance dictated by the relative velocity between the reader and the encoder. Moreover, by making certain strips of the chain inoperative (e. g. , by cutting them), it is possible to encode information that can be read as the absence (logic state "1") or presence (logic state "0") of peaks, or dips, at predefined positions in the output AM signal of the reader line. Since short strips suffice to generate interstub coupling, unprecedented data density per surface (DPS = 26. 04 bit/cm 2 ) is obtained, as revealed by the implementation of 6. 4 mm × 60 mm 100-bit encoders.
Ajuts:	Ministerio de Economía y Competitividad TEC2016-75650-R Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-1159
Drets:	Tots els drets reservats.
Llengua:	Anglès
Document:	Article ; recerca ; Versió acceptada per publicar
Matèria:	Chipless radio frequency identification (chipless-RFID) ; Microstrip technology ; Microwave encoder ; Motion control
Publicat a:	IEEE transactions on microwave theory and techniques, Vol. 67 , issue 9 (Sept. 2019) , p. 3527-3536, ISSN 0018-9480

DOI: 10.1109/TMTT.2019.2929128

Postprint 11 p, 707.4 KB

El registre apareix a les col·leccions:
Documents de recerca > Documents dels grups de recerca de la UAB > Centres i grups de recerca (producció científica) > Enginyeries > CIMITEC-UAB
Articles > Articles de recerca
Articles > Articles publicats