Inkjet-Printed Sulfide-Selective Electrode
Pol, Roberto (Universitat Autònoma de Barcelona. Departament de Química)
Moya Lara, Ana (Institut de Microelectrònica de Barcelona)
Gabriel, Gemma (Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina)
Gabriel, David (Universitat Autònoma de Barcelona. Departament d'Enginyeria Química, Biològica i Ambiental)
Céspedes Mulero, Francisco (Universitat Autònoma de Barcelona. Departament de Química)
Baeza Labat, Maria del Mar (Universitat Autònoma de Barcelona. Departament de Química)

Data:	2017
Resum:	Inkjet printing technology has emerged as an alternative manufacturing method for low-cost production of electrodes. Despite significant progress, there is still a lack in the production of ion-selective electrodes. Herein, the two-step fabrication of the first inkjet-printed sulfide-selective electrode (IPSSE) is described. The two-step fabrication consists of printing a silver electrode followed by an electrochemical deposition of sulfide to produce a second kind electrode (Ag/Ag2S). The performance of this novel device was tested using potentiometric measurements. Nernstian response (−29. 4 ± 0. 3 mV·decade-1) was obtained within concentrations of 0. 03-50 mM with a response time of ∼3 s. Furthermore, river/sea-spiked environmental samples and samples from a bioreactor for sulfate reduction to sulfide were measured and compared against a commercial sensor giving no significant differences. The IPSSE described in this work showed good reproducibility and durability during daily measurements over 15 days without any special storage conditions. Considering all the current challenges in inkjet-printed ion-selective electrodes, this different fabrication approach opens a new perspective for mass production of all-solid state ion-selective electrodes.
Ajuts:	Ministerio de Economía y Competitividad CTQ2015-69802-C2-1-R Agència de Gestió d'Ajuts Universitaris i de Recerca 2014/SGR-1255
Nota:	Altres ajuts: Autonomous University of Barcelona PIF grant
Drets:	Tots els drets reservats.
Llengua:	Anglès
Document:	Article ; recerca ; Versió acceptada per publicar
Matèria:	Sulfide detection ; Inkjet printing ; Second kind electrode ; Ion-selective electrode
Publicat a:	Analytical chemistry, Vol. 89, Issue 22 (October 2017) , p. 12231-12236, ISSN 1520-6882

DOI: 10.1021/acs.analchem.7b03041

10 p, 4.0 MB

El registre apareix a les col·leccions:
Documents de recerca > Documents dels grups de recerca de la UAB > Centres i grups de recerca (producció científica) > Enginyeries > GENOCOV
Articles > Articles de recerca
Articles > Articles publicats