Resultados globales: 3 registros encontrados en 0.02 segundos.
Artículos, Encontrados 3 registros
Artículos Encontrados 3 registros  
1.
23 p, 1.1 MB Order quantification of hexagonal periodic arrays fabricated by in situ solvent-assisted nanoimprint lithography of block copolymers / Delgado Simao, Claudia (Institut Català de Nanociència i Nanotecnologia) ; Khunsin, Worawut (Institut Català de Nanociència i Nanotecnologia) ; Kehagias, Nikolaos (Institut Català de Nanociència i Nanotecnologia) ; Salaun, Mathieu (Centre national de la recherche scientifique. Laboratoire des Technologies de la Microélectronique) ; Zelsmann, Marc (Centre national de la recherche scientifique. Laboratoire des Technologies de la Microélectronique) ; Morris, Michael A. (Tyndall National Institute. School of Chemistry) ; Sotomayor Torres, Clivia M. (Institut Català de Nanociència i Nanotecnologia)
Directed self-assembly of block copolymer polystyrene-b-polyethylene oxide (PS-b-PEO) thin film was achieved by a one-pot methodology of solvent vapor assisted nanoimprint lithography (SAIL). Simultaneous solvent-anneal and imprinting of a PS-b-PEO thin film on silicon without surface pre-treatments yielded a 250 nm line grating decorated with 20 nm diameter nanodots array over a large surface area of up to 4′ wafer scale. [...]
2014 - 10.1088/0957-4484/25/17/175703
Nanotechnology, Vol. 25, Issue 17 (May 2014) , art. 175703  
2.
7 p, 1.4 MB Self-Assembled Nanofeatures in Complex Three-Dimensional Topographies via Nanoimprint and Block Copolymer Lithography Methods / Cummins, Cian (Trinity College Dublin) ; Borah, Dipu (Trinity College Dublin) ; Rasappa, Sozaraj (Tampere University of Technology) ; Senthamaraikannan, Ramsankar (Trinity College Dublin) ; Delgado Simao, Claudia (Institut Català de Nanociència i Nanotecnologia) ; Francone, Achille (Institut Català de Nanociència i Nanotecnologia) ; Kehagias, Nikolaos (Institut Català de Nanociència i Nanotecnologia) ; Sotomayor Torres, Clivia M. (Institut Català de Nanociència i Nanotecnologia) ; Morris, Michael A. (Trinity College Dublin)
Achieving ultrasmall dimensions of materials and retaining high throughput are critical fabrication considerations for nanotechnology use. This article demonstrates an integrated approach for developing isolated sub-20 nm silicon oxide features through combined "top-down" and "bottom-up" methods: nanoimprint lithography (NIL) and block copolymer (BCP) lithography. [...]
2017 - 10.1021/acsomega.7b00781
ACS omega, Vol. 2, Issue 8 (August 2017) , p. 4417-4423  
3.
12 p, 3.6 MB Integrated 3D hydrogel waveguide out-coupler by step-and-repeat thermal nanoimprint lithography : A promising sensor device for water and pH / Francone, Achille (Institut Català de Nanociència i Nanotecnologia) ; Kehoe, Timothy (Institut Català de Nanociència i Nanotecnologia) ; Obieta, Isabel (Tecnalia Research & Innovation) ; Sáez Martínez, Virginia (Tecnalia Research & Innovation) ; Bilbao, Leire (Tecnalia Research & Innovation) ; Khokhar, Ali Z. (University Glasgow) ; Gadegaard, Nikolaj (University Glasgow) ; Delgado Simao, Claudia (Institut Català de Nanociència i Nanotecnologia) ; Kehagias, Nikolaos (Institut Català de Nanociència i Nanotecnologia) ; Sotomayor Torres, Clivia M. (Institut Català de Nanociència i Nanotecnologia)
Hydrogel materials offer many advantages for chemical and biological sensoring due to their response to a small change in their environment with a related change in volume. Several designs have been outlined in the literature in the specific field of hydrogel-based optical sensors, reporting a large number of steps for their fabrication. [...]
2018 - 10.3390/s18103240
Sensors, Vol. 18, Issue 10 (October 2018) , art. 3240  

¿Le interesa recibir alertas sobre nuevos resultados de esta búsqueda?
Defina una alerta personal vía correo electrónico o subscríbase al canal RSS.