Results overview: Found 6 records in 0.02 seconds.
Articles, 6 records found
Articles 6 records found  
1.
27 p, 958.3 KB Interfacial engineering of metal oxides for highly stable halide perovskite solar cells / Mingorance, Alba (Institut Català de Nanociència i Nanotecnologia) ; Xie, Haibing (Institut Català de Nanociència i Nanotecnologia) ; Kim, Hui-Seon (Ecole Polytechnique Fédérale de Lausanne. Institute of Chemical Sciences and Engineering) ; Wang, Zaiwei (Ecole Polytechnique Fédérale de Lausanne. Institute of Chemical Sciences and Engineering) ; Balsells, Marc (Institut Català de Nanociència i Nanotecnologia) ; Morales Melgares, Anna (Institut Català de Nanociència i Nanotecnologia) ; Domingo Marimon, Neus (Institut Català de Nanociència i Nanotecnologia) ; Kazuteru, Nonomura (Ecole Polytechnique Fédérale de Lausanne. Institute of Chemical Sciences and Engineering) ; Tress, Wolfgang (Ecole Polytechnique Fédérale de Lausanne. Institute of Chemical Sciences and Engineering) ; Fraxedas, Jordi (Institut Català de Nanociència i Nanotecnologia) ; Vlachopoulos, Nick (Ecole Polytechnique Fédérale de Lausanne. Institute of Chemical Sciences and Engineering) ; Hagfeldt, Anders (Ecole Polytechnique Fédérale de Lausanne. Institute of Chemical Sciences and Engineering) ; Lira-Cantu, Monica (Institut Català de Nanociència i Nanotecnologia)
Oxides employed in halide perovskite solar cells (PSCs) have already demonstrated to deliver enhanced stability, low cost, and the ease of fabrication required for the commercialization of the technology. [...]
2018 - 10.1002/admi.201800367
Advanced materials interfaces, Vol. 5, issue 22 (Nov. 2018) , art. 1800367  
2.
15 p, 2.1 MB Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures / Khenkin, M.V. (Helmholtz-Zentrum Berlin für Materialien und Energie GmbH) ; Katz, Eugene A. (Ilse Katz Institute for Nanoscale Science and Technology) ; Abate, Antonio (Helmholtz-Zentrum Berlin für Materialien und Energie GmbH) ; Bardizza, Giorgio (European Commission. Joint Research Centre) ; Berry, Joseph J. (National Renewable Energy Laboratory) ; Brabec, C. (Helmholtz Institute Erlangen-Nürnberg (HI-ErN). Forschungszentrum Jülich (FZJ)) ; Brunetti, F. (CHOSE (Centre for Hybrid and Organic Solar Energy). Department of Electronic Engineering. University of Rome Tor Vergata) ; Bulović, V. (Department of Electrical Engineering and Computer Science. Massachusetts Institute of Technology) ; Burlingame, Q. (Andlinger Center for Energy & The Environment. Princeton University) ; Di Carlo, Aldo (CHOSE (Centre for Hybrid and Organic Solar Energy). Department of Electronic Engineering. University of Rome Tor Vergata) ; Cheacharoen, R. (Metallurgy and Materials Science Research Institute. Chulalongkorn University) ; Cheng, Y.B. (State Key Laboratory of Advanced Technology for Materials Synthesis and Processing. Wuhan University of Technology) ; Colsmann, A. (Light Technology Institute. Karlsruhe Institute of Technology (KIT)) ; Cros, S. (University of Grenoble Alpes. CEA. LITEN. INES) ; Domanski, K. (Fluxim AG) ; Dusza, M. (Saule Technologies. Wroclaw Technology Park) ; Fell, C.J. (CSIRO Energy) ; Forrest, S.R. (Department of Materials Science and Engineering. University of Michigan) ; Galagan, Y. (TNO - Solliance. High Tech Campus) ; Di Girolamo, D. (Department of Chemistry. University of Rome La Sapienza) ; Grätzel, M. (Laboratory for Photonics and Interfaces. Institute of Chemical Sciences and Engineering. École Polytechnique Fédérale de Lausanne) ; Hagfeldt, Anders. (Laboratory of Photomolecular Science. Institute of Chemical Sciences and Engineering. École Polytechnique Fédérale de Lausanne) ; von Hauff, E. (Vrije Universiteit Amsterdam) ; Hoppe, Harald (Center for Energy and Environmental Chemistry Jena (CEEC Jena). Friedrich Schiller University Jena) ; Kettle, J. (School of Electronic Engineering. Bangor University. Bangor) ; Köbler, H. (Helmholtz-Zentrum Berlin für Materialien und Energie GmbH) ; Leite, M.S. (Department of Materials Science and Engineering. University of California) ; Liu, S.(. (Key Laboratory for Advanced Energy Devices; Shaanxi Engineering Lab for Advanced Energy Technology; Institute for Advanced Energy Materials; School of Materials Science and Engineering. Shaanxi Normal University) ; Loo, Y.L. (Department of Chemical and Biological Engineering. Princeton University) ; Luther, J.M. (National Renewable Energy Laboratory) ; Ma, C.Q. (Printable Electronics Research Center. Suzhou Institute of Nano-Tech and Nano-Bionics. Chinese Academy of Sciences (CAS)) ; Madsen, Morten. (SDU NanoSYD. Mads Clausen Institute. University of Southern Denmark) ; Manceau, M. (University of Grenoble Alpes. CEA. LITEN. INES) ; Matheron, M. (University of Grenoble Alpes. CEA. LITEN. INES) ; McGehee, M. (University of Colorado Boulder) ; Meitzner, R. (Center for Energy and Environmental Chemistry Jena (CEEC Jena). Friedrich Schiller University Jena) ; Nazeeruddin, M.K. (Group for Molecular Engineering of Functional Materials. Institute of Chemical Sciences and Engineering. École Polytechnique Fédérale de Lausanne) ; Nogueira, A.F. (Laboratório de Nanotecnologia e Energia Solar. Chemistry Institute. University of Campinas - UNICAMP) ; Odabaşı, Ç. (Department of Chemical Engineering. Boğaziçi University. Bebek) ; Osherov, A. (Department of Electrical Engineering and Computer Science. Massachusetts Institute of Technology) ; Park, N.G. (School of Chemical Engineering. Sungkyunkwan University (SKKU)) ; Reese, M.O. (National Renewable Energy Laboratory) ; De Rossi, F. (SPECIFIC. College of Engineering. Swansea University. Bay Campus) ; Saliba, M. (IEK-5 Photovoltaik. Forschungszentrum Jülich GmbH) ; Schubert, Ulrich S (Laboratory of Organic and Macromolecular Chemistry (IOMC). Friedrich Schiller University Jena) ; Snaith, H.J. (Clarendon Laboratory. University of Oxford) ; Stranks, S.D. (Cavendish Laboratory. University of Cambridge) ; Tress, W. (Laboratory of Photomolecular Science. Institute of Chemical Sciences and Engineering. École Polytechnique Fédérale de Lausanne) ; Troshin, P.A. (IPCP RAS) ; Turkovic, V. (SDU NanoSYD. Mads Clausen Institute. University of Southern Denmark) ; Veenstra, S. (TNO - Solliance. High Tech Campus) ; Visoly-Fisher, I. (Ilse Katz Institute for Nanoscale Science and Technology. Ben-Gurion University of the Negev) ; Walsh, A. (Department of Materials Science and Engineering. Yonsei University) ; Watson, T. (SPECIFIC. College of Engineering. Swansea University. Bay Campus) ; Xie, Haibing (Institut Català de Nanociència i Nanotecnologia) ; Yıldırım, R. (Department of Chemical Engineering. Boğaziçi University. Bebek) ; Zakeeruddin, S.M. (Laboratory for Photonics and Interfaces. Institute of Chemical Sciences and Engineering. École Polytechnique Fédérale de Lausanne) ; Zhu, K. (National Renewable Energy Laboratory) ; Lira-Cantu, Monica (Institut Català de Nanociència i Nanotecnologia)
Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. [...]
2020 - 10.1038/s41560-019-0529-5
Nature energy, Vol. 5 (2020) , p. 35-49  
3.
16 p, 1.1 MB Incorporation of Counter Ions in Organic Molecules : New Strategy in Developing Dopant-Free Hole Transport Materials for Efficient Mixed-Ion Perovskite Solar Cells / Zhang, Jinbao (Uppsala University. Department of Chemistry-Ångström Laboratory) ; Xu, Bo (KTH Royal Institute of Technology) ; Yang, Li (Uppsala University. Department of Engineering Science) ; Mingorance, Alba (Institut Català de Nanociència i Nanotecnologia) ; Ruan, Changqing (Uppsala University. Department of Engineering Science) ; Hua, Yong (KTH-Royal Institute of Technology) ; Wang, Linqin (KTH Royal Institute of Technology) ; Vlachopoulos, Nick (École Polytechnique Fédérale de Lausanne) ; Lira-Cantu, Monica (Institut Català de Nanociència i Nanotecnologia) ; Boschloo, Gerrit (Uppsala University. Department of Chemistry-Ångström Laboratory) ; Hagfeldt, Anders (Ecole Polytechnique Fédérale de Lausanne) ; Sun, Licheng (Dalian University of Technology) ; Johansson, Erik M.J. (Uppsala University. Department of Chemistry-Ångström Laboratory)
Hole transport matertial (HTM) as charge selective layer in perovskite solar cells (PSCs) plays an important role in achieving high power conversion efficiency (PCE). It is known that the dopants and additives are necessary in the HTM in order to improve the hole conductivity of the HTM as well as to obtain high efficiency in PSCs, but the additives can potentially induce device instability and poor device reproducibility. [...]
2017 - 10.1002/aenm.201602736
Advanced Energy Materials, Vol. 7, Issue 14 (July 2017) , art. 1602736  
4.
6 p, 987.3 KB Effect of cs-incorporated NiOx on the performance of perovskite solar cells / Kim, Hui-Seon (Ecole Polytechnique Fédérale de Lausanne) ; Seo, Ji-Youn (Ecole Polytechnique Fédérale de Lausanne) ; Xie, Haibing (Institut Català de Nanociència i Nanotecnologia) ; Lira-Cantu, Monica (Institut Català de Nanociència i Nanotecnologia) ; Zakeeruddin, Shaik Mohammed (Ecole Polytechnique Fédérale de Lausanne) ; Gratzel, Michael (Ecole Polytechnique Fédérale de Lausanne) ; Hagfeldt, Anders (Ecole Polytechnique Fédérale de Lausanne)
The effect of Cs-incorporated NiO on perovskite solar cells with an inverted structure was investigated, where NiO and PCBM were used as selective contacts for holes and electrons, respectively. It was found that the generation of an Ni phase in an NiO layer was significantly suppressed by employing cesium. [...]
2017 - 10.1021/acsomega.7b01179
ACS omega, Vol. 2, Issue 12 (December 2017) , p. 9074-9079  
5.
93 p, 11.3 MB Towards Oxide Electronics : a Roadmap / Coll Bau, Mariona (Institut de Ciència de Materials de Barcelona) ; Fontcuberta i Griñó, Josep (Institut de Ciència de Materials de Barcelona) ; Althammer, M. (Technische Universität München. Physik-Department) ; Bibes, Manuel (Unité Mixte de Physique) ; Boschker, H. (Max Planck Institute for Solid State Research) ; Calleja, Albert (OXOLUTIA S.L.) ; Cheng, G. (Pittsburgh Quantum Institute) ; Cuoco, M. (Università di Salerno) ; Dittmann, R. (Peter Grünberg Institut) ; Dkhil, B. (Université Paris-Saclay) ; El Baggari, I. (Cornell University) ; Fanciulli, M. (University of Milano Bicocca. Department of Materials Science) ; Fina, Ignasi (Institut Català de Nanociència i Nanotecnologia) ; Fortunato, E. (CEMOP/UNINOVA) ; Frontera, Carlos (Institut de Ciència de Materials de Barcelona) ; Fujita, S. (Kyoto University) ; Garcia, V. (Unité Mixte de Physique) ; Goennenwein, S.T.B. (Technische Universität Dresden) ; Granqvist, C.G. (Upp sala University) ; Grollier, J. (Unité Mixte de Physique) ; Gross, R. (Nanosystems Initiative Munich (NIM)) ; Hagfeldt, Anders (Ecole Polytechnique Fédérale de Lausanne) ; Herranz Casabona, Gervasi (Institut de Ciència de Materials de Barcelona) ; Hono, K. (National Institute for Materials Science) ; Houwman, E. (University of Twente) ; Huijben, M. (University of Twente) ; Kalaboukhov, A. (MC2. Chalmers University of Technology) ; Keeble, D.J. (University of Dundee) ; Koster, G. (University of Twente) ; Kourkoutis, L.F. (Cornell University) ; Levy, J. (Pittsburgh Quantum Institute) ; Lira-Cantu, Monica (Institut Català de Nanociència i Nanotecnologia) ; MacManus-Driscoll, J.L. (University of Cambridge. Department of Materials Science and Metallurgy) ; Mannhart, J. (Max Planck Institute for Solid State Research) ; Martins, R. (MDM Laboratory) ; Menzel, S. (Pittsburgh Quantum Institute) ; Mikolajick, T. (Chair of Nanoelectronic Materials) ; Napari, M. (University of Cambridge. Department of Materials Science and Metallurgy) ; Nguyen, M.D. (University of Twente) ; Niklasson, G. (Upp sala University) ; Paillard, C. (University of Arkansas. Physics Department) ; Panigrahi, S. (CEMOP/UNINOVA) ; Rijnders, G. (University of Twente) ; Sánchez Barrera, Florencio (Institut de Ciència de Materials de Barcelona) ; Sanchis, P. (Universitat Politècnica de València) ; Sanna, S. (Technical University of Denmark. Department of Energy Storage and Conversion) ; Schlom, D.G. (Cornell University. Department of Material Science and Engineering) ; Schroeder, U. (NaMLab gGmbH) ; Shen, K.M. (Cornell University. Department of Physics) ; Siemon, A. (Institut für Werkstoffe der Elektrotechnik) ; Spreitzer, M. (Jožef Stefan Institute) ; Sukegawa, H. (Research Center for Magnetic and Spintronic Materials) ; Tamayo, R. (OXOLUTIA S.L.) ; van den Brink, J. (Institute for Theoretical Solid State Physics) ; Pryds, N. (Technical University of Denmark. Department of Energy Storage and Conversion) ; Granozio, F.M. (CNR-SPIN. Naples Unit)
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore's law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. [...]
2019 - 10.1016/j.apsusc.2019.03.312
Applied surface science, Vol. 482 (July 2019) , p. 1-93  
6.
9 p, 2.3 MB PbZrTiO3 ferroelectric oxide as an electron extraction material for stable halide perovskite solar cells / Perez-Tomas, Amador (Institut Català de Nanociència i Nanotecnologia) ; Xie, Haibing (Institut Català de Nanociència i Nanotecnologia) ; Wang, Zaiwei (Ecole Polytechnique Fédérale de Lausanne) ; Kim, Hui-Seon (Ecole Polytechnique Fédérale de Lausanne) ; Shirley, Ian (Institut Català de Nanociència i Nanotecnologia) ; Turren-Cruz, Silver-Hamill (Ecole Polytechnique Fédérale de Lausanne) ; Morales Melgares, Anna (Institut Català de Nanociència i Nanotecnologia) ; Saliba, Benedicte (Institut Català de Nanociència i Nanotecnologia) ; Tanenbaum, David M. (Institut Català de Nanociència i Nanotecnologia) ; Saliba, Michael (Ecole Polytechnique Fédérale de Lausanne) ; Zakeeruddin, Shaik Mohammed (Ecole Polytechnique Fédérale de Lausanne) ; Gratzel, Michael (Ecole Polytechnique Fédérale de Lausanne) ; Hagfeldt, Anders (Ecole Polytechnique Fédérale de Lausanne) ; Lira-Cantu, Monica (Institut Català de Nanociència i Nanotecnologia)
State-of-the-art halide perovskite solar cells employ semiconductor oxides as electron transport materials. Defects in these oxides, such as oxygen vacancies (O ), act as recombination centres and, in air and UV light, reduce the stability of the solar cell. [...]
2019 - 10.1039/c8se00451j
Sustainable energy and fuels, Vol. 3, Issue 2 (February 2019) , p. 382-389  

See also: similar author names
1 Hagfeldt, Anders.
Interested in being notified about new results for this query?
Set up a personal email alert or subscribe to the RSS feed.