Results overview: Found 17 records in 0.02 seconds.
Articles, 14 records found
Research literature, 3 records found
Articles 14 records found  1 - 10next  jump to record:
1.
6 p, 1.6 MB A study on free-standing 3C-SiC bipolar power diodes / Li, Fan (University of Warwick. School of Engineering) ; Renz, Arne Benjamin (University of Warwick. School of Engineering) ; Perez-Tomas, Amador (Institut Català de Nanociència i Nanotecnologia) ; Shah, Vishal (University of Warwick. School of Engineering) ; Gammon, Peter (University of Warwick. School of Engineering) ; La Via, Francesco (Consiglio Nazionale delle Ricerche. Instituto per la Microelettronica e Microsistemi) ; Jennings, Mike (Swansea University. College of Engineering) ; Mawby, Philip (University of Warwick. School of Engineering)
A low p-n built-in potential (1. 75 V) makes 3C-SiC an attractive choice for medium voltage bipolar or charge balanced devices. Until recently, most 3C-SiC had been grown on Si, and power device fabrication had, therefore, been hindered by issues, such as high defect density and limited processing temperature, while devices were necessarily limited to lateral structures. [...]
2021 - 10.1063/5.0054433
Applied physics letters, Vol. 118, issue 24 (June 2021) , art. 242101  
2.
21 p, 1.3 MB Charge transfer in steam purified arc discharge single walled carbon nanotubes filled with lutetium halides / Santidrián, Ana (J. Heyrovsky Institute of the Physical Chemistry) ; Kierkowicz, Magdalena (Institut de Ciència de Materials de Barcelona) ; Pach, Elzbieta (Institut Català de Nanociència i Nanotecnologia) ; Darvasiová, Denisa (J. Heyrovsky Institute of the Physical Chemistry) ; Ballesteros, Belén (Institut Català de Nanociència i Nanotecnologia) ; Tobias, Gerard (Institut de Ciència de Materials de Barcelona) ; Kalbáč, Martin (J. Heyrovsky Institute of the Physical Chemistry)
In the present work, the effect of doping on electronic properties in bulk purified and filled arc-discharge single-walled carbon nanotubes samples is studied for the first time by in situ Raman spectroelectrochemical method. [...]
2020 - 10.1039/d0cp01408g
Physical chemistry chemical physics, Vol. 22, issue 18 (2020) , p. 10063-10075  
3.
13 p, 1.5 MB Enhancing the intrinsic p-type conductivity of the ultra-wide bandgap Ga₂O₃ semiconductor / Chikoidze, Ekaterine (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Sartel, Corinne (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Mohamed, Hagar (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Madaci, Ismail (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Tchelidze, Tamar (Ivane Javakhishvili Tbilisi State University. Department of Physics) ; Modreanu, Myrcea (University College Cork. Tyndall National Institute) ; Vales Castro, Pablo (Institut Català de Nanociència i Nanotecnologia) ; Rubio, Carles (Institut Català de Nanociència i Nanotecnologia) ; Arnold, Christophe (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Sallet, Vincent (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Dumont, Yves. (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Perez-Tomas, Amador (Institut Català de Nanociència i Nanotecnologia)
While there are several n-type transparent semiconductor oxides (TSO) for optoelectronic applications (e. g. LEDs, solar cells or display TFTs), their required p-type counterpart oxides are known to be more challenging. [...]
2019 - 10.1039/c9tc02910a
Journal of Materials Chemistry C, Vol. 7, issue 33 (Sep. 2019) , p. 10231-10239  
4.
43 p, 1.9 MB P-type ultrawide-band-gap spinel ZnGa2O4 : new perspectives for energy electronics / Chikoidze, Ekaterine (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Sartel, Corinne. (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Madaci, Ismail (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Mohamed, Hagar (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Vilar, Christele (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Ballesteros, Belén (Institut Català de Nanociència i Nanotecnologia) ; Belarre Triviño, Francisco Javier (Institut Català de Nanociència i Nanotecnologia) ; Del Corro, Elena (Institut Català de Nanociència i Nanotecnologia) ; Vales Castro, Pablo (Institut Català de Nanociència i Nanotecnologia) ; Sauthier, Guillaume (Institut Català de Nanociència i Nanotecnologia) ; Li, Lijie (Swansea University. College of Engineering) ; Jennings, Mike (Swansea University. College of Engineering) ; Sallet, Vincent (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Dumont, Yves (Université Paris-Saclay. Groupe d'Etude de la Matière Condensée) ; Perez-Tomas, Amador (Institut Català de Nanociència i Nanotecnologia)
The family of spinel compounds is a large and important class of multifunctional materials of general formulation ABX with many advanced applications in energy and optoelectronic areas such as fuel cells, batteries, catalysis, photonics, spintronics, and thermoelectricity. [...]
2020 - 10.1021/acs.cgd.9b01669
Crystal Growth and Design, Vol. 20 Núm. 4 (April 2020) , p. 2535-2546  
5.
27 p, 4.8 MB Ultraviolet pulsed laser irradiation of multi-walled carbon nanotubes in nitrogen atmosphere / Pérez del Pino, Ángel (Institut de Ciència de Materials de Barcelona) ; Gyorgy, Eniko (Institut de Ciència de Materials de Barcelona) ; Cabana Jiménez, Laura (Institut de Ciència de Materials de Barcelona) ; Ballesteros, Belén (Institut Català de Nanociència i Nanotecnologia) ; Tobias, Gerard (Institut de Ciència de Materials de Barcelona)
Laser irradiation of randomly oriented multi-walled carbon nanotube (MWCNT) networks has been carried out using a pulsed Nd:YAG UV laser in nitrogen gas environment. The evolution of the MWCNT morphology and structure as a function of laser fluence and number of accumulated laser pulses has been studied using electron microscopies and Raman spectroscopy. [...]
2014 - 10.1063/1.4864776
Journal of applied physics, Vol. 115, issue 9 (March 2014) , art. 93501  
6.
11 p, 359.4 KB Electrochemical behavior of nanostructured La0.8Sr0.2MnO3 as cathodes for solid oxide fuel cells / Sacanell, Joaquín (Consejo Nacional de Investigaciones Científicas y Técnicas (Argentina)) ; Hernández Sánchez, Joaquín (Comisión Nacional de Energía Atómica) ; Rubio López, Adrián Ezequiel (Comisión Nacional de Energía Atómica) ; Martinelli, Hernán (Comisión Nacional de Energía Atómica) ; Siepe, Jimena (Comisión Nacional de Energía Atómica) ; Leyva, Ana Gabriela (Universidad Nacional de General San Martín) ; Ferrari, Valeria Paola (Consejo Nacional de Investigaciones Científicas y Técnicas (Argentina)) ; Pruneda, Miguel (Institut Català de Nanociència i Nanotecnologia) ; Juan, Dilson (Consejo Nacional de Investigaciones Científicas y Técnicas (Argentina)) ; Lamas, Diego Germán (Universidad Nacional de General San Martín)
LaSrMnO (LSM) is one of the most commonly used cathodes in Solid Oxide Fuel Cells (SOFC). In spite of the fact that nanostructured cathodes are expected to display improved performance, the high operating temperature (∼ 1000°C) of LSM-based SOFCs hinders their stability. [...]
2017 - 10.1149/07801.0667ecst
ECS transactions, Vol. 78, Núm. 1 (July 2017) , p. 667-675  
7.
17 p, 2.1 MB Firing tests on clay-rich raw materials from the algarve basin (Southern Portugal) : Study of mineral transformations with temperature / Trindade, Maria José (Universidade de Aveiro. GeoBioTec - GeoBiociências) ; Dias, Maria Isabel (Universidade de Aveiro. GeoBioTec - GeoBiociências) ; Coroado, Joâo (Universidade de Aveiro. GeoBioTec - GeoBiociências) ; Rocha, Fernando (Universidade de Aveiro. GeoBioTec - GeoBiociências)
In cases where the provenance of raw materials used in the manufacture of local archeological ceramics is of interest, a detailed study of thermal transformations of minerals may be useful. The purpose of this study was to measure mineralogical transformations of different types of clays obtained during experimental firing runs, carried out at different temperatures, with the main goal of establishing Algarve reference groups based on the composition of raw material and high-temperature mineralogy, which may be compared with ceramics in studies of provenance. [...]
2010 - 10.1346/CCMN.2010.0580205
Clays and Clay Minerals, Vol. 58, Núm. 2 (2010) , p. 188-204  
8.
37 p, 448.3 KB Leaves of isoprene-emitting tobacco plants maintain PSII stability at high temperatures / Pollastri, Susanna (Institute for Sustainable Plant Protection (Florència, Itàlia)) ; Jorba, Ignasi (Institut de Bioenginyeria de Catalunya) ; Hawkins, Timothy J. (Durham University. Department of Biosciences) ; Llusià Benet, Joan (Centre de Recerca Ecològica i d'Aplicacions Forestals) ; Michelozzi, Marco (Istituto di Bioscienze e Biorisorse (Florència, Itàlia)) ; Navajas, Daniel (Institut de Bioenginyeria de Catalunya) ; Peñuelas, Josep (Centre de Recerca Ecològica i d'Aplicacions Forestals) ; Hussey, Patrick J. (Durham University. Department of Biosciences) ; Knight, Marc R. (Durham University. Department of Biosciences) ; Loreto, Francesco (Università degli Studi di Napoli Federico II. Dipartimenti di Biologia)
At high temperatures, isoprene-emitting plants display a higher photosynthetic rate and a lower nonphotochemical quenching (NPQ) compared with nonemitting plants. The mechanism of this phenomenon, which may be very important under current climate warming, is still elusive. [...]
2019 - 10.1111/nph.15847
The new phytologist, Vol. 223, issue 3 (Aug. 2019) , p. 1307-1318  
9.
19 p, 868.7 KB Design of antibody-functionalized carbon nanotubes filled with radioactivable metals towards a targeted anticancer therapy / Spinato, Cinzia (Centre national de la recherche scientifique (França). Institut de Biologie Moléculaire et Cellulaire) ; Pérez Ruiz De Garibay, Aritz (Centre national de la recherche scientifique (França). Institut de Biologie Moléculaire et Cellulaire) ; Kierkowicz, Magdalena (Institut de Ciència de Materials de Barcelona) ; Pach, Elzbieta (Institut Català de Nanociència i Nanotecnologia) ; Martincic, Markus (Institut de Ciència de Materials de Barcelona) ; Klippstein, Rebecca (King's College London. Institute of Pharmaceutical Science) ; Bourgognon, Maxime (King's College London. Institute of Pharmaceutical Science) ; Wang, Julie Tzu-Wen (King's College London. Institute of Pharmaceutical Science) ; Ménard-Moyon, Cécilia (Centre national de la recherche scientifique (França). Institut de Biologie Moléculaire et Cellulaire) ; Al-Jamal, Khuloud T. (King's College London. Institute of Pharmaceutical Science) ; Ballesteros, Belén (Institut Català de Nanociència i Nanotecnologia) ; Tobias, Gerard (Institut de Ciència de Materials de Barcelona) ; Bianco, Alberto (Centre national de la recherche scientifique (França). Institut de Biologie Moléculaire et Cellulaire)
In the present work we have devised the synthesis of a novel promising carbon nanotube carrier for the targeted delivery of radioactivity, through a combination of endohedral and exohedral functionalization. [...]
2016 - 10.1039/c5nr07923c
Nanoscale, Vol. 8, issue 25 (2016) , p. 12626-12638  
10.
7 p, 1.7 MB Epitaxial growth of SrTiO3 films on cube-textured Cu-Clad substrates by PLD at low temperature under reducing atmosphere / Padilla Sánchez, José Antonio (Universitat de Barcelona. Departament de Ciència de Materials i Química Física) ; Xuriguera, Elena (Universitat de Barcelona. Departament de Ciència de Materials i Química Física) ; Rodríguez Domínguez, Laura (Institut Català de Nanociència i Nanotecnologia) ; Vannozzi, Angelo (Centro ricerche energia Frascati) ; Segarra Rubí, Mercè (Universitat de Barcelona. Departament de Ciència de Materials i Química Física) ; Celentano, Giuseppe (Centro ricerche energia Frascati) ; Varela Fernández, Manuel (Universitat de Barcelona. Departament de Física Aplicada)
The growth of epitaxial {001}<100> SrTiO (STO) on low-cost cube-textured Cu-based clad substrate at low temperature was carried out by means of pulsed laser deposition (PLD). STO film was deposited in one step under a reducing atmosphere (5% H and 95% Ar mixture) to prevent the oxidation of the metal surface. [...]
2017 - 10.1186/s11671-017-1997-9
Nanoscale research letters, Vol. 12 (2017) , art. 226  

Articles : 14 records found   1 - 10next  jump to record:
Research literature 3 records found  
1.
19.5 MB Development of High Temperature Superconductors Coated Conductors for Resistive Fault Current Limiters with the Current Flow Diverter Architecture / Barusco, Pedro ; Obradors, Xavier, dir. ; Granados García, Xavier, dir. ; Piniella, J. Francesc, dir.
The primary benefit of a metallic stabilization/shunt in 2nd Generation (2G) High Temperature Superconductors (HTS) coated conductors (CC) is to prevent damage during quench by providing an alternative path for the current flow. [...]
2022  
2.
184 p, 17.6 MB Superconducting Coated Conductors for Proton Beam Screens in High-Energy Particle Accelerators / Romanov, Artur ; Puig Molina, María Teresa, dir.
A fi d'impulsar la investigació de la física d'altes energies més enllà de la vida útil del Gran Col·lisionador d'Hadrons (LHC), l'Organització Europea per a la Recerca Nuclear (CERN) va iniciar una iniciativa de R + D per a un col·lisionador de protons de 100 TeV amb 100 km de circumferència, l'anomenat Future Circular Collider (FCC). [...]
Con el fin de impulsar la investigación de la física de altas energías más allá de la vida útil del Gran Colisionador de Hadrones (LHC), la Organización Europea para la Investigación Nuclear (CERN) inició una iniciativa de I + D para un colisionador de protones de 100 TeV con 100 km de circunferencia, el llamado Future Circular Collider (FCC). [...]
In order to drive high-energy research beyond the lifetime of the Large Hadron Collider (LHC), the European Organization for Nuclear Research (CERN) kicked off an R&D initiative for a 100 TeV proton-proton collider with 100 km circumference, the so-called Future Circular Collider (FCC). [...]

2022  
3.
339 p, 21.9 MB Transient Liquid Assisted Growth of YBCO Superconducting Films : Growth Kinetics, Physical Properties and Vortex Pinning / Banchewski, Juri ; Puig i Molina, Mª Teresa, dir. ; Navau Ros, Carles, dir.
Els superconductors d'alta temperatura (HTS) han liderat els programes d'investigació I desenvolupament durant tres dècades i actualment es troben a prop de ser integrats en aplicacions de gran escala, en forma de cintes superconductores (CCs), una arquitectura de cinta robusta i flexible que permet el creixement texturat d'aquest material fràgil. [...]
Los superconductores de alta temperatura (HTS) han liderado los programas de investigación y desarrollo durante tres décadas y actualmente se encuentran cerca de ser integrados, en aplicaciones de gran escala, en forma de cintas superconductoras (CCs), una arquitectura de cinta robusta y flexible que permite el crecimiento texturado de este material frágil. [...]
High temperature superconductors (HTS) have been driving research and development programs for about three decades now and are on the verge of entering large scale utilization in the form of Coated Conductors (CCs), a robust and flexible tape architecture that enables textured growth of the rather brittle material class. [...]

2020  

Interested in being notified about new results for this query?
Set up a personal email alert or subscribe to the RSS feed.