Depósito Digital de Documentos de la UAB Encontrados 6 registros  La búsqueda tardó 0.01 segundos. 
1.
6 p, 987.3 KB Effect of cs-incorporated NiOx on the performance of perovskite solar cells / Kim, Hui-Seon (Ecole Polytechnique Fédérale de Lausanne) ; Seo, Ji-Youn (Ecole Polytechnique Fédérale de Lausanne) ; Xie, HaiBing (Institut Català de Nanociència i Nanotecnologia) ; Lira Cantú, Mónica (Institut Català de Nanociència i Nanotecnologia) ; Zakeeruddin, Shaik Mohammed (Ecole Polytechnique Fédérale de Lausanne) ; Gratzel, Michael (Ecole Polytechnique Fédérale de Lausanne) ; Hagfeldt, Anders (Ecole Polytechnique Fédérale de Lausanne)
The effect of Cs-incorporated NiO on perovskite solar cells with an inverted structure was investigated, where NiO and PCBM were used as selective contacts for holes and electrons, respectively. It was found that the generation of an Ni phase in an NiO layer was significantly suppressed by employing cesium. [...]
2017 - 10.1021/acsomega.7b01179
ACS omega, Vol. 2, Issue 12 (December 2017) , p. 9074-9079  
2.
7 p, 1.4 MB Self-Assembled Nanofeatures in Complex Three-Dimensional Topographies via Nanoimprint and Block Copolymer Lithography Methods / Cummins, Cian (Trinity College Dublin) ; Borah, Dipu (Trinity College Dublin) ; Rasappa, Sozaraj (Tampere University of Technology) ; Senthamaraikannan, Ramsankar (Trinity College Dublin) ; Delgado Simao, Claudia (Institut Català de Nanociència i Nanotecnologia) ; Francone, Achille (Institut Català de Nanociència i Nanotecnologia) ; Kehagias, Nikolaos (Institut Català de Nanociència i Nanotecnologia) ; Sotomayor Torres, Clivia M. (Institut Català de Nanociència i Nanotecnologia) ; Morris, Michael A. (Trinity College Dublin)
Achieving ultrasmall dimensions of materials and retaining high throughput are critical fabrication considerations for nanotechnology use. This article demonstrates an integrated approach for developing isolated sub-20 nm silicon oxide features through combined "top-down" and "bottom-up" methods: nanoimprint lithography (NIL) and block copolymer (BCP) lithography. [...]
2017 - 10.1021/acsomega.7b00781
ACS omega, Vol. 2, Issue 8 (August 2017) , p. 4417-4423  
3.
13 p, 3.1 MB Design of a Multifunctional Nanoengineered PLLA Surface by Maximizing the Synergies between Biochemical and Surface Design Bactericidal Effects / Nerantzaki, Maria (Aristotle University of Thessaloniki. Department of Chemistry) ; Kehagias, Nikolaos (Institut Català de Nanociència i Nanotecnologia) ; Francone, Achille (Institut Català de Nanociència i Nanotecnologia) ; Fernández Estévez, Ariadna (Institut Català de Nanociència i Nanotecnologia) ; Sotomayor Torres, Clivia M. (Institut Català de Nanociència i Nanotecnologia) ; Papi, Rigini (Aristotle University of Thessaloniki. Department of Chemistry) ; Choli-Papadopoulou, Theodora (Aristotle University of Thessaloniki. Department of Chemistry) ; Bikiaris, Dimitrios N. (Aristotle University of Thessaloniki. Department of Chemistry)
Nanotechnology, the manipulation of matter on atomic, molecular, and supramolecular scales, has become the most appealing strategy for biomedical applications and is of great interest as an approach to preventing microbial risks. [...]
2018 - 10.1021/acsomega.7b01756
ACS omega, Vol. 3, Issue 2 (February 2018) , p. 1509-1521  
4.
8 p, 4.7 MB Low-Cost Strategy for the Development of a Rapid Electrochemical Assay for Bacteria Detection Based on AuAg Nanoshells / Russo, Lorenzo (Institut Català de Nanociència i Nanotecnologia) ; Leva Bueno, Juan (Institut Català de Nanociència i Nanotecnologia) ; Bergua, José Francisco (Institut Català de Nanociència i Nanotecnologia) ; Costantini, Monica (University of Parma) ; Giannetto, Marco (University of Parma) ; Puntes, Víctor (Institut Català de Nanociència i Nanotecnologia) ; De la Escosura Muñiz, Alfredo (Institut Català de Nanociència i Nanotecnologia) ; Merkoçi, Arben (Institut Català de Nanociència i Nanotecnologia)
A low-cost strategy for the simple and rapid detection of bacterial cells in biological matrixes is presented herein. Escherichia coli and Salmonella typhimurium were chosen as model bacteria for the development of an electrochemical assay based on hollow AuAg nanoshells (NSs). [...]
2018 - 10.1021/acsomega.8b02458
ACS omega, Vol. 3, Issue 12 (December 2018) , p. 18849-18856  
5.
11 p, 5.4 MB Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces / Bueno, Rebeca (Institute of Materials Science of Madrid) ; Marciello, Marzia (Universidad Complutense de Madrid) ; Moreno, Miguel (Centro de Astrobiología) ; Sánchez Sánchez, Carlos (Institute of Materials Science of Madrid) ; Martínez, José I. (Institute of Materials Science of Madrid) ; Martínez, Lidia (Institute of Materials Science of Madrid) ; Prats Alfonso, Elisabet (Institut de Microelectrònica de Barcelona) ; Guimerà Brunet, Anton (Institut de Microelectrònica de Barcelona) ; Garrido Ariza, José A. (Institut Català de Nanociència i Nanotecnologia) ; Villa, Rosa (Institut de Microelectrònica de Barcelona) ; Mompean, Federico (Institute of Materials Science of Madrid) ; García Hernández, Mar (Institute of Materials Science of Madrid) ; Huttel, Yves (Institute of Materials Science of Madrid) ; Morales, María del Puerto (Institute of Materials Science of Madrid) ; Briones, Carlos (Centro de Astrobiología) ; López, María F. (Institute of Materials Science of Madrid) ; Ellis, Gary J. (Institute of Polymer Science and Technology) ; Vázquez, Luis (Institute of Materials Science of Madrid) ; Martín Gago, José A. (Institute of Materials Science of Madrid)
Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. [...]
2019 - 10.1021/acsomega.8b03152
ACS omega, Vol. 4, Issue 2 (February 2019) , p. 3287-3297  
6.
35 p, 2.8 MB Nanoporous Fe-based alloy prepared by selective dissolution : an effective Fenton catalyst for water remediation / Zhang, Huiyan (Universitat Autònoma de Barcelona. Departament de Física) ; Feng, Yuping (Universitat Autònoma de Barcelona. Departament de Física) ; Cheng, Yangyang (Beijing hang kong hang tian da xue. School of Materials Science and Engineering) ; Baró, M. D. (Universitat Autònoma de Barcelona. Departament de Física) ; Altube, Ainhoa (IK4-CIDETEC. Unidad de Superfícies Metálicas) ; García-Lecina, Eva (IK4-CIDETEC. Unidad de Superfícies Metálicas) ; Alcaide, Francisco (IK4-CIDETEC. Unidad de Materiales para Energía) ; Pellicer Vilà, Eva M. (Eva Maria) (Universitat Autònoma de Barcelona. Departament de Física) ; Zhang, Tao (Beijing hang kong hang tian da xue. School of Materials Science and Engineering) ; Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física)
A fully nanoporous Fe-rich alloy, prepared by selective dissolution of melt-spun Fe₄₃. ₅Cu₅₆. ₅ ribbons, exhibits outstanding properties as a heterogeneous Fenton catalyst toward the degradation of methyl orange (MO) in aqueous solution. [...]
2017 - 10.1021/acsomega.7b00043
ACS omega, Vol. 2, issue 2 (Feb. 2017) , p. 653−662  

¿Le interesa recibir alertas sobre nuevos resultados de esta búsqueda?
Defina una alerta personal vía correo electrónico o subscríbase al canal RSS.