|
1.
|
|
14 p, 13.9 MB |
Accelerated biodegradation of FeMn porous alloy coated with ZnO : Effect on cytocompatibility and antibiofilm properties
/
Bartkowska, Aleksandra (Universitat Autònoma de Barcelona. Departament de Física) ;
Turner, Adam Benedict (University of Gothenburg. Department of Biomaterials) ;
Blanquer Jerez, Andreu (Universitat Autònoma de Barcelona. Departament de Biologia Cel·lular, de Fisiologia i d'Immunologia) ;
Nicolenco, Aliona (Cidetec Surface Engineering) ;
Trobos, Margarita (University of Gothenburg. Department of Biomaterials) ;
Nogués, C. (Carme) (Universitat Autònoma de Barcelona. Departament de Biologia Cel·lular, de Fisiologia i d'Immunologia) ;
Pellicer Vilà, Eva Maria (Universitat Autònoma de Barcelona. Departament de Física) ;
Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física)
Fe-based alloys are being studied as potential candidates for biodegradable implants; however, their degradation rates remain too slow. To accelerate biodegradation while simultaneously hindering biofilm formation, a ZnO coating was deposited onto porous equiatomic FeMn alloy discs by sol-gel method using dip coating. [...]
2023 -  10.1016/j.surfcoat.2023.129886
Surface and coatings technology, Vol. 471 (October 2023) , art. 129886
|
|
|
2.
|
|
11 p, 4.4 MB |
Pulsed laser deposition of epitaxial non-doped PbTiO3 thin films from Pbo-TiO2 mosaic targets
/
Sakai, Joe (Institut Català de Nanociència i Nanotecnologia) ;
Caicedo Roque, Jose Manuel (Institut Català de Nanociència i Nanotecnologia) ;
Vales Castro, Pablo (Institut Català de Nanociència i Nanotecnologia) ;
Padilla-Pantoja, Jessica (Institut Català de Nanociència i Nanotecnologia) ;
Sauthier, Guillaume (Institut Català de Nanociència i Nanotecnologia) ;
Santiso, José (Institut Català de Nanociència i Nanotecnologia)
PbTiO3 (PTO) suffers from difficulty in preparing high-density robust bulk ceramics, which in turn has been a bottleneck in thin films growth with physical vapor deposition (PVD) methods. In the present work, we prepared non-doped PTO thin films by a pulsed laser deposition (PLD) method with either a single PTO target or a mosaic target consisting of PbO and TiO2 pie-shaped pieces. [...]
2021 - 10.3390/coatings11060662
Coatings, Vol. 11, issue 6 (June 2021) , art. 662
|
|
|
3.
|
|
12 p, 2.8 MB |
Control of lateral composition distribution in graded films of soluble solid systems A1-xBx by partitioned dual-beam pulsed laser deposition
/
Sakai, Joe (Institut Català de Nanociència i Nanotecnologia) ;
Caicedo Roque, Jose Manuel (Institut Català de Nanociència i Nanotecnologia) ;
Vales Castro, Pablo (Institut Català de Nanociència i Nanotecnologia) ;
Padilla-Pantoja, Jessica (Institut Català de Nanociència i Nanotecnologia) ;
Sauthier, Guillaume (Institut Català de Nanociència i Nanotecnologia) ;
Catalan, Gustau (Institut Català de Nanociència i Nanotecnologia) ;
Santiso, José (Institut Català de Nanociència i Nanotecnologia)
Lateral compositionally-graded thin films are powerful media for the observation of phase boundaries aswell as for high-throughputmaterials exploration. We herein propose amethod to prepare epitaxial lateral compositionally-graded films using a dual-beampulsed laser deposition (PLD)method with two targets separated by a partition. [...]
2020 - 10.3390/COATINGS10060540
Coatings, Vol. 10, issue 6 (June 2020) , art. 540
|
|
|
4.
|
|
9 p, 2.2 MB |
Monolayered versus multilayered electroless NiP coatings : Impact of the plating approach on the microstructure, mechanical and corrosion properties of the coatings
/
Salicio-Paz, A. (CIDETEC) ;
Grande, H. (CIDETEC) ;
Pellicer Vilà, Eva Maria (Universitat Autònoma de Barcelona. Departament de Física) ;
Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física) ;
Fornell Beringues, Jordina (Universitat Autònoma de Barcelona. Departament de Física) ;
Offoiach, R. (Università degli Studi di Udine. Dipartimento Politecnico di Ingegneria e Architettura (Italy)) ;
Lekka, M. (Università degli Studi di Udine. Dipartimento Politecnico di Ingegneria e Architettura (Italy)) ;
García-Lecina, Eva (CIDETEC)
Electroless nickel-phosphorous (NiP) coatings were produced on low carbon steel substrates for a total plating time of 3 h. Different preparation modalities were pursued. Multilayered coatings were produced by stacking three layers of the same composition by successive electroless plating with rinsing steps in between. [...]
2019 - 10.1016/j.surfcoat.2019.04.013
Surface and coatings technology, Vol. 368 (June 2019) , p. 138-146
|
|
|
5.
|
|
12 p, 3.6 MB |
Electrodeposition of nanocrystalline Fe-P coatings : influence of bath temperature and glycine concentration on structure, mechanical and corrosion behavior
/
Kovalska, Natalia (Universität Wien. Institut für Physikalische Chemie) ;
Tsyntsaru, Natalia (Vilnius University. Department of Physical Chemistry (Lithuania)) ;
Cesiulis, Henrikas (Vilnius University. Department of Physical Chemistry (Lithuania)) ;
Gebert, Annet (Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden) ;
Fornell Beringues, Jordina (Universitat Autònoma de Barcelona. Departament de Física) ;
Pellicer Vilà, Eva Maria (Universitat Autònoma de Barcelona. Departament de Física) ;
Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física) ;
Hansal, Wolfgang (Hirtenberger Engineered Surfaces GmbH (Austria)) ;
Kautek, Wolfgang (Universität Wien. Institut für Physikalische Chemie)
A detailed electrochemical study and investigation of a Fe-P glycine bath as a function of the temperature and glycine concentrations and current density, and their resulting corrosion and mechanical behavior is presented. [...]
2019 - 10.3390/COATINGS9030189
Coatings, Vol. 9, Issue 3 (March 2019) , art. 189
|
|
|
6.
|
|
10 p, 3.0 MB |
Epitaxial versus polycrystalline shape memory Cu-Al-Ni thin films
/
Bilican, Doğa (Universitat Autònoma de Barcelona. Departament de Física) ;
Kurdi, Samer (University of Cambridge. Department of Materials Science and Metallurgy) ;
Zhu, Yi (University of Cambridge. Department of Materials Science and Metallurgy) ;
Solsona Mateos, Pau (Universitat Autònoma de Barcelona. Departament de Física) ;
Pellicer Vilà, Eva Maria (Universitat Autònoma de Barcelona. Departament de Física) ;
Barber, Zoe H. (University of Cambridge. Department of Materials Science and Metallurgy) ;
Greer, Alan Lindsay (University of Cambridge. Department of Materials Science and Metallurgy) ;
Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física) ;
Fornell Beringues, Jordina (Universitat Autònoma de Barcelona. Departament de Física)
In this work, two different approaches were followed to obtain Cu-Al-Ni thin films with shape memory potential. On the one hand, Cu-Ni/Al multilayers were grown by magnetron sputtering at room temperature. [...]
2019 - 10.3390/coatings9050308
Coatings, Vol. 9, Issue 5 (May 2019) , art. 308
|
|
|
7.
|
|
14 p, 407.6 KB |
Electrodeposition of amorphous Fe-Cr-Ni stainless steel alloy with high corrosion resistance, low cytotoxicity and soft magnetic properties
/
Bertero, Enrico (Eidgenössische Materialprüfungs- und Forschungsanstalt) ;
Hasegawa, Madoka (Eidgenössische Materialprüfungs- und Forschungsanstalt) ;
Staubli, Samuel (Eidgenössische Materialprüfungs- und Forschungsanstalt) ;
Pellicer Vilà, Eva Maria (Universitat Autònoma de Barcelona. Departament de Física) ;
Herrmann, Inge K. (Eidgenössische Materialprüfungs- und Forschungsanstalt) ;
Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física) ;
Michler, Johann (Eidgenössische Materialprüfungs- und Forschungsanstalt) ;
Philippe, Laetitia (Eidgenössische Materialprüfungs- und Forschungsanstalt)
Electrodeposition of Fe-Cr-Ni alloy thin films with high corrosion resistance, low cytotoxicity and soft-magnetic properties is reported. Fe-Cr-Ni films with Cr contents from 5 wt% to 40 wt% were prepared by adjusting the current density during electrodeposition and the film properties were investigated. [...]
2018 - 10.1016/j.surfcoat.2018.06.003
Surface and coatings technology, Vol. 349 (Sep. 2018) , p. 745-751
|
|
|
8.
|
|
16 p, 421.5 KB |
Enhanced mechanical properties and microstructural modifications in electrodeposited Fe-W alloys through controlled heat treatments
/
Mulone, Antonio (Chalmers University of Technology) ;
Nicolenco, Aliona (Vilnius University) ;
Fornell Beringues, Jordina (Universitat Autònoma de Barcelona. Departament de Física) ;
Pellicer Vilà, Eva Maria (Universitat Autònoma de Barcelona. Departament de Física) ;
Tsyntsaru, N. (Vilniaus Universitetas) ;
Cesiulis, Henrikas (Vilniaus Universitetas) ;
Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física) ;
Klement, U. (Chalmers tekniska högskola)
Among W alloys, Fe-W has seen much attention recently, due to the need of moving toward the design of environmentally friendly materials. Coatings with 4, 16 and 24 at. % of W were electrodeposited from an environmental friendly Fe(III)-based glycolate-citrate bath. [...]
2018 - 10.1016/j.surfcoat.2018.07.007
Surface and coatings technology, Vol. 350 (September 2018) , p. 20-30
|
|
|
9.
|
|
19 p, 1.0 MB |
Electrodeposition of manganese layers from sustainable sulfate based electrolytes
/
Fernández Barcia, Mónica (Institut für Festkörper- und Werkstofforschung Dresden) ;
Hoffmann, Volker (Leibniz Institute for Solid State and Materials Research Dresden) ;
Oswald, Steffen (Institut für Festkörper- und Werkstofforschung Dresden) ;
Giebeler, Lars (Institut für Festkörper- und Werkstofforschung Dresden) ;
Wolff, Ulrike (Institut für Festkörper- und Werkstofforschung Dresden) ;
Uhlemann, Margitta (Institut für Festkörper- und Werkstofforschung Dresden) ;
Gebert, Annett (Institut für Festkörper- und Werkstofforschung Dresden)
Functional manganese-(Mn)-containing layers are becoming increasingly important in the fields of sacrificial corrosion protection, biodegradable medical devices or electrochemical energy conversion systems. [...]
2018 - 10.1016/j.surfcoat.2017.11.028
Surface and coatings technology, Vol. 334 (January 2018) , p. 261-268
|
|
|
10.
|
|
16 p, 13.2 MB |
Inkjet-printed chemical solution Y₂O₃ layers for planarization of technical substrates
/
Vilardell, Marta (Oxolutia S.L.) ;
Fornell Beringues, Jordina (Universitat Autònoma de Barcelona. Departament de Física) ;
Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física) ;
Vlad, Roxana (Oxolutia S.L.) ;
Fernández, Juan Carlos (KAO-Chimigraf) ;
Puig, Joaquim (KAO-Chimigraf) ;
Usoskin, Alexander (Bruker HTS GmbH) ;
Palau, Anna (Institut de Ciència de Materials de Barcelona) ;
Puig i Molina, Mª Teresa (Institut de Ciència de Materials de Barcelona) ;
Obradors, Xavier (Institut de Ciència de Materials de Barcelona) ;
Calleja, Ana (Oxolutia S.L.)
The implementation of the Chemical Solution Deposition (CSD) methodology with 23 the Drop on Demand (DoD) inkjet printing (IJP) technology has been successfully employed to 24 develop a Solution Deposition Planarization (SDP) method. [...]
2017
Coatings, Vol. 7, issue 12 (2017) , art. 227
|
|
visitante ::
identificación
alerta personal vía correo electrónico o subscríbase al 
canal RSS.
