Preparation and Characterization of Nanoparticle-Doped Polymer Inclusion Membranes. Application to the Removal of Arsenate and Phosphate from Waters
Anticó, Enriqueta (Universitat de Girona)
Vera, Ruben (Universitat de Girona)
Vázquez, Francisco (Universitat de Girona)
Fontàs, Clàudia (Universitat de Girona)
Lu, Changyong (University of Copenhagen)
Ros i Badosa, Josep (Universitat Autònoma de Barcelona. Departament de Química)

Fecha:	2021
Resumen:	Nanoparticle-doped polymer inclusion membranes (NP-PIMs) have been prepared and characterized as new materials for the removal of arsenate and phosphate from waters. PIMs are made of a polymer, cellulose triacetate (CTA), and an extractant, which interacts with the compound of interest. We have used the ionic liquid (IL) trioctylmethylammonium chloride (Aliquat 336) as the extractant and have investigated how the addition of nanoparticles can modify membrane properties. To this end, inorganic nanoparticles, such as ferrite (FeO), SiO and TiO, and multiwalled carbon nanotubes (MWCNTs), were blended with the polymer/extractant mixture. Scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), and contact angle measurements have been used to characterize the material. Moreover, PIM stability was checked by measuring the mass loss during the experiments. Since Aliquat 336 acts as an anion exchanger, the NP-PIMs have been explored in two different applications: (i) as sorbent materials for the extraction of arsenate and phosphate anions; (ii) as an organic phase for the separation of arsenate and phosphate in a three-phase system. The presence of oleate-coated ferrite NP in the PIM formulation represents an improvement in the efficiency of NP-PIMs used as sorbents; nevertheless, a decrease in the transport efficiency for arsenate but not for phosphate was obtained. The ease with which the NP-PIMs are prepared suggests good potential for future applications in the treatment of polluted water. Future work will address three main aspects: firstly, the implementation of the FeO-PIMs for the removal of As(V) in real water containing complex matrices; secondly, the study of phosphate recovery with other cell designs that allow large volumes of contaminated water to be treated; and thirdly, the investigation of the role of MWCNTs in PIM stability.
Ayudas:	Agencia Estatal de Investigación PID2019-107033GB-C22
Derechos:	Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original.
Lengua:	Anglès
Documento:	Article ; recerca ; Versió publicada
Materia:	Polymer inclusion membranes ; Nanoparticles ; Multiwalled carbon nanotubes ; Arsenate ; Phosphate ; Removal
Publicado en:	Materials, Vol. 14, Num. 4 (February 2021) , art. 878, ISSN 1996-1944

DOI: 10.3390/ma14040878
PMID: 33673298

14 p, 3.1 MB

El registro aparece en las colecciones:
Artículos > Artículos de investigación
Artículos > Artículos publicados