Contribution of plastic waste recovery to greenhouse gas (GHG) savings in Spain
Sevigné Itoiz, Eva (Universitat Autònoma de Barcelona. Institut de Ciència i Tecnologia Ambientals)
Martínez Gasol, Carles (Universitat Autònoma de Barcelona. Institut de Ciència i Tecnologia Ambientals)
Rieradevall, Joan (Universitat Autònoma de Barcelona. Departament d'Enginyeria Química, Biològica i Ambiental)
Gabarrell Durany, Xavier (Universitat Autònoma de Barcelona. Departament d'Enginyeria Química, Biològica i Ambiental)

Date:	2015
Abstract:	This paper concentrates on the quantification of greenhouse gas (GHG) emissions of post-consumer plastic waste recovery (material or energy) by considering the influence of the plastic waste quality (high or low), the recycled plastic applications (virgin plastic substitution or non-plastic substitution) and the markets of recovered plastic (regional or global). The aim is to quantify the environmental consequences of different alternatives in order to evaluate opportunities and limitations to select the best and most feasible plastic waste recovery option to decrease the GHG emissions. The methodologies of material flow analysis (MFA) for a time period of thirteen years and consequential life cycle assessment (CLCA) have been integrated. The study focuses on Spain as a representative country for Europe. The results show that to improve resource efficiency and avoid more GHG emissions, the options for plastic waste management are dependent on the quality of the recovered plastic. The results also show that there is an increasing trend of exporting plastic waste for recycling, mainly to China, that reduces the GHG benefits from recycling, suggesting that a new focus should be introduced to take into account the split between local recycling and exporting.
Rights:	Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, i la comunicació pública de l'obra, sempre que no sigui amb finalitats comercials, i sempre que es reconegui l'autoria de l'obra original. No es permet la creació d'obres derivades.
Language:	Anglès
Document:	Article ; recerca ; Versió sotmesa a revisió
Subject:	Plastic waste recycling ; Material flow analysis ; Life cycle assessment ; Plastic waste quality ; Greenhouse gases (GHG) ; Spain
Published in:	Waste management, Vol. 46 (Desember 2015) , p. 557-567, ISSN 0956-053X

DOI: 10.1016/j.wasman.2015.08.007

Article. Pre-print 35 p, 884.3 KB

Apèndix A. Pre-print 13 p, 291.3 KB

Apèndix B. Pre-print 9 p, 336.3 KB

The record appears in these collections:
Research literature > UAB research groups literature > Research Centres and Groups (research output) > Experimental sciences > Institut de Ciència i Tecnologia Ambientals (ICTA) > Sustainability and Environmental Protection (Sostenipra)
Articles > Research articles
Articles > Published articles