Web of Science: 24 citas, Scopus: 23 citas, Google Scholar: citas
Solution-based synthesis and processing of Sn- and Bi-doped Cu₃SbSe₄ nanocrystals, nanomaterials and ring-shaped thermoelectric generators
Liu, Yu (Institut de Recerca en Energia de Catalunya)
Ortega, Silvia (Institut de Recerca en Energia de Catalunya)
Cadavid, Doris (Institut de Recerca en Energia de Catalunya)
Ibáñez, Maria (ETH Zürich. Institute of Inorganic Chemistry)
Xi, Lili (Chinese Academy of Sciences. Shanghai Institute of Ceramics)
De Roo, Jonathan (Ghent University. Department of Inorganic and Physical Chemistry)
López, Antonio M. (Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrónica)
Martí-Sánchez, Sara (Institut Català de Nanociència i Nanotecnologia)
Cabezas, Ignasi (Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrónica)
Mata Fernández, María de la (Institut Català de Nanociència i Nanotecnologia)
Luo, Zhishan (Institut de Recerca en Energia de Catalunya)
Dun, Chaochao (Wake Forest University. Center for Nanotechnology and Molecular Materials)
Dobrozhan, Oleksandr (Institut de Recerca en Energia de Catalunya)
Zhang, Wenqing (Chinese Academy of Sciences. Shanghai Institute of Ceramics)
Martins, José (Ghent University. Department of Organic and Marcromolecular Chemistry)
Kovalenko, Maksym V. (ETH Zürich. Institute of Inorganic Chemistry)
Arbiol i Cobos, Jordi (Institut Català de Nanociència i Nanotecnologia)
Noriega, German (Cidete Ingenieros S.L. (Vilanova i la Geltrú - España))
Song, Ji-Ming (Anhui University. School of Chemistry & Chemical Engineering)
Cabot, Andreu (Institut de Recerca en Energia de Catalunya)
Institució Catalana de Recerca i Estudis Avançats

Fecha: 2017
Resumen: Copper-based chalcogenides that comprise abundant, low-cost, and environmental friendly elements are excellent materials for a number of energy conversion applications, including photovoltaics, photocatalysis, and thermoelectrics (TE). In such applications, the use of solution-processed nanocrystals (NCs) to produce thin films or bulk nanomaterials has associated several potential advantages, such as high material yield and throughput, and composition control with unmatched spatial resolution and cost. Here we report on the production of Cu₃SbSe₄ (CASe) NCs with tuned amounts of Sn and Bi dopants. After proper ligand removal, as monitored by nuclear magnetic resonance and infrared spectroscopy, these NCs were used to produce dense CASe bulk nanomaterials for solid state TE energy conversion. By adjusting the amount of extrinsic dopants, dimensionless TE figures of merit (ZT) up to 1. 26 at 673 K were reached. Such high ZT values are related to an optimized carrier concentration by Sn doping, a minimized lattice thermal conductivity due to efficient phonon scattering at point defects and grain boundaries, and to an increase of the Seebeck coefficient obtained by a modification of the electronic band structure with Bi doping. Nanomaterials were further employed to fabricate ring-shaped TE generators to be coupled to hot pipes, which provided 20 mV and 1 mW per TE element when exposed to a 160 °C temperature gradient. The simple design and good thermal contact associated with the ring geometry and the potential low cost of the material solution processing may allow the fabrication of TE generators with short payback times.
Nota: Número d'acord de subvenció EC/FP7/310250
Nota: Número d'acord de subvenció MINECO/MAT2014-59961-C2-2-R
Nota: Número d'acord de subvenció MINECO/ENE2013-46624-C4-3-R
Nota: Número d'acord de subvenció AGAUR/2013/BP-A00344
Nota: Número d'acord de subvenció EC/FP7/306733
Nota: Número d'acord de subvenció AGAUR/2014/SGR-1638
Nota: Número d'acord de subvenció MINECO/SEV/2013-0295
Derechos: Tots els drets reservats.
Lengua: Anglès.
Documento: article ; recerca ; acceptedVersion
Materia: Bulk nano-materials ; Composition control ; Electronic band structure ; Environmental-friendly ; Lattice thermal conductivity ; Solution-processing ; Synthesis and processing ; Thermoelectric generators
Publicado en: Journal of Materials Chemistry A, Vol. 5, Issue 6 (February 2017) , p. 2592-2602, ISSN 2050-7496

DOI: 10.1039/c6ta08467b


Post-print
18 p, 2.2 MB

El registro aparece en las colecciones:
Documentos de investigación > Documentos de los grupos de investigación de la UAB > Centros y grupos de investigación (producción científica) > Ciencias > Institut Català de Nanociència i Nanotecnologia (ICN2)
Artículos > Artículos de investigación
Artículos > Artículos publicados

 Registro creado el 2018-07-19, última modificación el 2019-07-12



   Favorit i Compartir