The charge of component layers of illite-smectite in bentonites and the nature of end-member illite
Środoń, Jan (Institute of Geological Sciences PAN)
Zeelmaekers, Edwin (University of Leuven. Laboratory for Applied Geology and Mineralogy)
Derkowski, Arkadiusz (Institute of Geological Sciences PAN)

Fecha:	2009
Resumen:	The nature of component layers of mixed-layer illite-smectite and their possible evolution in the course of illitization have been debated since the 1960s. The present study is a new attempt to solve these problems, using samples collected from diverse geological formations around the world. Twenty three purified illite-smectites from bentonites and hydrothermal rocks, covering the complete range of expandability, were analyzed chemically, including NH determination, and their structural formulae were calculated. The exchangeable cations (EXCH) were plotted vs. the fixed cations (FIX) yielding the following experimental regression: EXCH = 0. 436FIX + 0. 41 (R = 0. 98) FIX and EXCH depend on the charge of the illite (Q) and smectite (Q) interlayers, and the fractions of these interlayers in the bulk clay leading to: EXCH =-Q/Q6 FIX + Q Analysis of these relations and independent measurements of the total specific surface area (TSSA) indicate that the layer charges of both types do not change in the course of illitization. The smectite layer charge is equal to 0. 41 and the illite layer charge is equal to 0. 95 per O(OH). End-member illite has a well defined composition that is close to intermediate between muscovite and phengite, with fixed cations content greater than that specified in the AIPEA classification of layer silicates: FIX(SiAl)(AlFeMg)O(OH) The established relationship allows the calculation of the mean number (N) of 2:1 layers in all fundamental particles and also the fraction of smectitic layers (f) from FIX: N=Q/(Q FIX) f =(Q FIX)/Q N and f can be used to calculate TSSA, and all three parameters can also be calculated from cation exchange capacity and from X-ray diffraction peak positions, utilizing the regressions established here.
Derechos:	Aquest material està protegit per drets d'autor i/o drets afins. Podeu utilitzar aquest material en funció del que permet la legislació de drets d'autor i drets afins d'aplicació al vostre cas. Per a d'altres usos heu d'obtenir permís del(s) titular(s) de drets.
Lengua:	Anglès
Documento:	Article ; recerca ; Versió publicada
Materia:	CEC ; Charge Density ; EGME ; Illite ; Illite-smectite ; Layer Charge ; NEWMOD ; Smectite ; Specific Surface Area ; Surface Area ; Water Sorption ; XRD
Publicado en:	Clays and Clay Minerals, Vol. 57, Núm. 5 (2009) , p. 649-671, ISSN 1552-8367

DOI: 10.1346/CCMN.2009.0570511

23 p, 1.4 MB  Acceso restringido a la UAB

El registro aparece en las colecciones:
Artículos > Artículos de investigación
Artículos > Artículos publicados