Carbon-based perovskite solar cells by screen printing with preheating
Martinez, V. C. (Universidad Nacional de Ingeniería. Facultad de Ciencias)
Xie, Haibing (Institut Català de Nanociència i Nanotecnologia)
Mingorance, Alba (Institut Català de Nanociència i Nanotecnologia)
Pereyra, Carlos (Institut Català de Nanociència i Nanotecnologia)
Narymany, A. (Institut Català de Nanociència i Nanotecnologia)
Gómez, M. M. (Universidad Nacional de Ingeniería. Facultad de Ciencias)
Fecha: |
2020 |
Resumen: |
Carbon-based perovskite solar cells were manufactured by the screen-printing method using a triple mesoscopic layer of TiO, ZrO and carbon. The perovskite solution was infiltrated at the TiO/ZrO porous interface through the printed carbon layer on top of the ZrO. Using a simple preheating of the substrates and the perovskite solution, a film deposited in air can be obtained. Using this method, an air-processed CPSC made under a humid atmosphere with 55% RH achieved a PCE of 10. 35%. |
Derechos: |
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original. |
Lengua: |
Anglès |
Documento: |
Article ; recerca ; Versió publicada |
Materia: |
Carbon layers ;
Carbon-based ;
Humid atmospheres ;
Mesoscopics ;
Screen printing methods |
Publicado en: |
Journal of physics, Vol. 1433 (2020) , art. 12009, ISSN 1742-6596 |
DOI: 10.1088/1742-6596/1433/1/012009
El registro aparece en las colecciones:
Documentos de investigación >
Documentos de los grupos de investigación de la UAB >
Centros y grupos de investigación (producción científica) >
Ciencias >
Institut Català de Nanociència i Nanotecnologia (ICN2)Artículos >
Artículos de investigaciónArtículos >
Artículos publicados
Registro creado el 2021-01-25, última modificación el 2022-09-11