Performance assessment of a novel miniaturized RFID tag for inventorying and tracking metallic tools
López-Soriano, Sergio (Universitat Autònoma de Barcelona. Departament de Telecomunicació i Enginyeria de Sistemes)
Parrón Granados, Josep (Universitat Autònoma de Barcelona. Departament de Telecomunicació i Enginyeria de Sistemes)

Date:	2018
Abstract:	This contribution proposes a novel radio frequency identification tag antenna operating in the EU UHF band (865-868 MHz). Miniaturization techniques have been used to achieve a reduced volume (20 × 2. 56 × 3 mm 3 ) in order to make it suitable for labeling metallic tools. Simulations are used to assess the tag performance when operating on tools of different sizes. These simulations are validated through measurements in a reference scenario (anechoic chamber). Finally, a real scenario (tool hanging board) is considered in order to evaluate tag performance when interacting with other tags and tools.
Grants:	Ministerio de Economía y Competitividad TEC2015-69229-R
Rights:	Tots els drets reservats.
Language:	Anglès
Document:	Article ; recerca ; Versió acceptada per publicar
Subject:	Antenna design ; RFID tags ; Metallic objects ; Tool tagging ; UHF RFID system performance
Published in:	IEEE journal of radio frequency identification, Vol. 2, Issue 3 (September 2018) , p. 127-133, ISSN 2469-7281

DOI: 10.1109/JRFID.2018.2868780

Postprint 8 p, 782.2 KB

The record appears in these collections:
Articles > Research articles
Articles > Published articles