Unraveling the properties of sharply defined submicron scale FeCu and FePd magnetic structures fabricated by electrodeposition onto electron-beam-lithographed substrates
Dislaki, Evangelia (Universitat Autònoma de Barcelona. Departament de Física)
Cialone, Matteo (Istituto Nazionale di Ricerca Metrologica)
Celegato, Federica (Istituto Nazionale di Ricerca Metrologica)
Rizzi, Paola (Università di Torino. Dipartimento di Chimica (Italy))
Tiberto, Paola (Istituto Nazionale di Ricerca Metrologica)
Vadilonga, Simone (Helmholtz-Zentrum Berlin für Materialen und Energie GmbH (Germany))
Többens, Daniel (Helmholtz-Zentrum Berlin für Materialen und Energie GmbH (Germany))
Sort Viñas, Jordi (Universitat Autònoma de Barcelona. Departament de Física)
Pellicer Vilà, Eva Maria (Universitat Autònoma de Barcelona. Departament de Física)

Fecha:	2020
Resumen:	In this work, Fe-X (X = Cu, Pd) submicron-scale structures were electrodeposited onto pre-patterned substrates prepared by e-beam lithography. The FeCu and FePd (with reduced Pd content) systems were investigated as attractive candidates for a variety of potential applications in magnetic data storage and biomedicine. Confined growth in the restricted cavities resulted in a nanoscale grain size leading to well-defined geometries with sharp edges and corners and an average height of up to 215 nm. Specifically, nine 100 μm × 100 μm arrays of three geometries (cylindrical, rectangular and cruciform) in three different sizes were created. In addition, the total deposition time ranged from 3. 5 s (FeCu) to 200 s (FePd), i. e. much faster than by traditional physical vapor deposition approaches and was performed at ambient conditions. Magnetic force microscopy for the cylindrical and cruciform structures revealed virtually no contrast at zero field, suggesting magnetic curling effects (instead of coherent rotation) during magnetization reversal. These curling effects result in low values of remanent magnetization, which is advantageous in minimizing dipolar interactions between the structures either when they are deposited onto the substrate or eventually dispersed in a liquid (e. g. in biomedical applications, as drug delivery carriers, where particle agglomeration is undesirable).
Ayudas:	European Commission 642642 European Commission 648454 Ministerio de Economía y Competitividad MAT2017-86357-C3-1-R Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-292
Derechos:	Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, i la comunicació pública de l'obra, sempre que no sigui amb finalitats comercials, i sempre que es reconegui l'autoria de l'obra original. No es permet la creació d'obres derivades.
Lengua:	Anglès
Documento:	Article ; recerca ; Versió publicada
Materia:	Electrodeposition ; Submicron structures ; Electron-beam lithography ; Ferromagnetic
Publicado en:	Materials & design, Vol. 193 (August 2020) , art. 108826, ISSN 0261-3069

DOI: 10.1016/j.matdes.2020.108826

Postprint 43 p, 2.0 MB

12 p, 6.7 MB

El registro aparece en las colecciones:
Documentos de investigación > Documentos de los grupos de investigación de la UAB > Centros y grupos de investigación (producción científica) > Ciencias > Grupo de nanoingeniería de materiales, nanomagnetismo y nanomecánica (Gnm3) > SPIN-PORICS
Artículos > Artículos de investigación
Artículos > Artículos publicados