Proposal for a uniform data standard for ichnological 3D tracking and post-processing
Petruzzeli, Marco (Institut Català de Paleontologia Miquel Crusafont)
Razzolini, Novella (Institut Català de Paleontologia Miquel Crusafont)
Francescangeli, Ruggero (Università Degli Studi di Bari "Aldo Moro")

Fecha:	2011
Resumen:	Vertebrate fossil tracks have been studied through 3D modelling techniques during the last two decades to improve tracking procedures. Different laser scanners and software have been used during field investigation and this differentiation caused incompatibility between many analysis programs. Post processing procedures are not standardized among scientists and file precision give different results in additionally constrain comparison. The starting point to find a solution to the problem is to point out the main technologies used to collect data in the field. The resulting protocol does not oblige to uniform hardware but it does suggest combining different laser scanners with a minimum post processing to optimize the result. Important inkling would be to use 2D relief as a reference to organize 3D tracking procedures. Saving formats during post processing are improved by setting fixed landmarks integrated in the 3D model in a multitask file. The D. I. C. O. M. medical standard (*. cdm format) and the 3D printing international standard (*. stl format) when combined, may be a good solution for uniform the format. This approach might be the first step for the standardization of source and derived files and the creation of a worldwide 3D ichnological catalogue. This will allow creating a scientific improvement in terms of reproducibility and comparison of the experience.
Ayudas:	Ministerio de Ciencia e Innovación CGL2008-06533-C03-01
Derechos:	Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, i la comunicació pública de l'obra, sempre que no sigui amb finalitats comercials, i sempre que es reconegui l'autoria de l'obra original. No es permet la creació d'obres derivades.
Lengua:	Anglès
Documento:	Article ; recerca ; Versió publicada
Materia:	Dinosaur tracks ; Tracking protocol ; Post processing ; Data standard ; Digital archive
Publicado en:	Rivista italiana di paleontologia e stratigrafia, Vol. 117, No 3 (December 2011) , p. 521-530, ISSN 2039-4942

DOI: 10.13130/2039-4942/5990

10 p, 564.9 KB

El registro aparece en las colecciones:
Documentos de investigación > Documentos de los grupos de investigación de la UAB > Centros y grupos de investigación (producción científica) > Ciencias > Institut Català de Paleontologia Miquel Crusafont (ICP)
Artículos > Artículos de investigación
Artículos > Artículos publicados