Plasmonic assemblies of gold nanorods on nanoscale patterns of poly(ethylene glycol) : application in surface-enhanced Raman spectroscopy
Karabel, Sema (Erciyes University. Department of Materials Science and Engineering)
Patarroyo, Javier (Institut Català de Nanociència i Nanotecnologia)
Kiremitler, N. Burak (Erciyes University. Department of Materials Science and Engineering)
Pekdemir, Sami (Erciyes University. Department of Materials Science and Engineering)
Puntes, Víctor (Institut Català de Nanociència i Nanotecnologia)
Onses, M. Serdar (Erciyes University. Department of Materials Science and Engineering)

Fecha:	2018
Resumen:	Approaches are needed for the tailored assembly of plasmonic building blocks on the surface of substrates to synergistically enhance their properties. Here we demonstrate selective immobilization and assembly of gold nanorods (NRs) on substrates modified and patterned with end-grafted poly(ethylene glycol) (PEG) layers. The ligand exchange from the initial cetyltrimethylammonium bromide to sodium citrate was necessary for the immobilization of gold NRs onto PEG grafted substrates. Linear nanopatterns of PEG were fabricated using electrospun nanofibers as masks in oxygen plasma etching. The selective immobilization of citrate-stabilized gold NRs with a length of ∼50 nm and a width of 20 nm on the nanopatterned PEG layers led to linear and registered arrays of rods. The number of gold NRs per line depended on the width of the patterns and approached 1 when the width of the patterns was comparable to the length of the rods. The confinement of the binding regions led to a ∼3 fold increase in the number of gold NRs immobilized per unit area. The selective and dense immobilization of gold NRs on the nanoscale patterns of PEG resulted in spatially defined and strong surface-enhanced Raman scattering activity enabling detection of molecules at concentrations as low as 1 nM.
Ayudas:	Ministerio de Economía y Competitividad SEV-2013-0295
Derechos:	Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, i la comunicació pública de l'obra, sempre que no sigui amb finalitats comercials, i sempre que es reconegui l'autoria de l'obra original. No es permet la creació d'obres derivades.
Lengua:	Anglès
Documento:	Article ; recerca ; Versió acceptada per publicar
Materia:	Gold nanorods ; SERS ; Nanofabrication ; Plasmonics ; End-grafted polymers
Publicado en:	Journal of colloid and interface science, Vol. 532 (December 2018) , p. 449-455, ISSN 1095-7103

DOI: 10.1016/j.jcis.2018.07.124
PMID: 30099308

Post-print 22 p, 1.0 MB

El registro aparece en las colecciones:
Documentos de investigación > Documentos de los grupos de investigación de la UAB > Centros y grupos de investigación (producción científica) > Ciencias > Institut Català de Nanociència i Nanotecnologia (ICN2)
Artículos > Artículos de investigación
Artículos > Artículos publicados