Double-stub loaded microstrip line reader for very high data density microwave encoders
Herrojo, Cristian (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Paredes, Ferran (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Martín, Ferran, (Martín Antolín) (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)

Fecha:	2019
Resumen:	Compact and high-data density microwave encoders useful for motion control and near-field chipless radio frequency identification (chipless-RFID) applications are proposed in this paper. The encoders are chains of metallic strips etched on a dielectric substrate. The reader consists of a microstrip line loaded with a pair of identical open-ended folded stubs located at different positions and oriented face-to-face by their extremes. By displacing the encoder over the extremes of the stubs, interstub coupling arises when a strip is located on top of the stubs, thereby generating two transmission zeros (rather than one) in the frequency response of the line. Thus, the presence of a strip on top of the face-to-face stubs produces a variation in the transmission coefficient of the line, which in turn can be detected by feeding the line with a harmonic signal, conveniently tuned. Encoder motion generates an amplitude modulated (AM) signal at the output port of the line with peaks, or dips, separated by a time distance dictated by the relative velocity between the reader and the encoder. Moreover, by making certain strips of the chain inoperative (e. g. , by cutting them), it is possible to encode information that can be read as the absence (logic state "1") or presence (logic state "0") of peaks, or dips, at predefined positions in the output AM signal of the reader line. Since short strips suffice to generate interstub coupling, unprecedented data density per surface (DPS = 26. 04 bit/cm 2 ) is obtained, as revealed by the implementation of 6. 4 mm × 60 mm 100-bit encoders.
Ayudas:	Ministerio de Economía y Competitividad TEC2016-75650-R Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-1159
Derechos:	Tots els drets reservats.
Lengua:	Anglès
Documento:	Article ; recerca ; Versió acceptada per publicar
Materia:	Chipless radio frequency identification (chipless-RFID) ; Microstrip technology ; Microwave encoder ; Motion control
Publicado en:	IEEE transactions on microwave theory and techniques, Vol. 67 , issue 9 (Sept. 2019) , p. 3527-3536, ISSN 0018-9480

DOI: 10.1109/TMTT.2019.2929128

Postprint 11 p, 707.4 KB

El registro aparece en las colecciones:
Documentos de investigación > Documentos de los grupos de investigación de la UAB > Centros y grupos de investigación (producción científica) > Ingeniería > CIMITEC-UAB
Artículos > Artículos de investigación
Artículos > Artículos publicados