Control of lateral composition distribution in graded films of soluble solid systems A1-xBx by partitioned dual-beam pulsed laser deposition
Sakai, Joe (Institut Català de Nanociència i Nanotecnologia)
Caicedo Roque, Jose Manuel (Institut Català de Nanociència i Nanotecnologia)
Vales Castro, Pablo (Institut Català de Nanociència i Nanotecnologia)
Padilla-Pantoja, Jessica (Institut Català de Nanociència i Nanotecnologia)
Sauthier, Guillaume (Institut Català de Nanociència i Nanotecnologia)
Catalan, Gustau (Institut Català de Nanociència i Nanotecnologia)
Santiso, José (Institut Català de Nanociència i Nanotecnologia)
Date: |
2020 |
Abstract: |
Lateral compositionally-graded thin films are powerful media for the observation of phase boundaries aswell as for high-throughputmaterials exploration. We herein propose amethod to prepare epitaxial lateral compositionally-graded films using a dual-beampulsed laser deposition (PLD)method with two targets separated by a partition. Tuning the ambient pressure and the partition-substrate gap makes it possible to control of the gradient length of the deposits at the small sizes (≤ 10 mm) suitable for commercial oxide single crystal substrates. A simple Monte Carlo simulation qualitatively reproduced the characteristic features of the lateral thickness distribution. To demonstrate this method, we prepared (1-x)PbTiO-xPbZrO and (1-x)LaMnOLaSrMnO films with lateral composition gradient widths of 10 and 1 mm, respectively, with the partitioned dual PLD. |
Grants: |
Ministerio de Economía y Competitividad MAT2016-77100-C2-1-P Ministerio de Economía y Competitividad SEV-2017-0706
|
Note: |
Altres ajuts: AGAUR agency (project 2017SGR) |
Rights: |
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original. |
Language: |
Anglès |
Document: |
Article ; recerca ; Versió publicada |
Subject: |
Pulsed laser deposition ;
Compositionally-graded film ;
Morphotropic phase boundary ;
Monte Carlo method ;
Piezoelectric material ;
Perovskite type manganite |
Published in: |
Coatings, Vol. 10, issue 6 (June 2020) , art. 540, ISSN 2079-6412 |
DOI: 10.3390/COATINGS10060540
The record appears in these collections:
Research literature >
UAB research groups literature >
Research Centres and Groups (research output) >
Experimental sciences >
Catalan Institute of Nanoscience and Nanotechnology (ICN2)Articles >
Research articlesArticles >
Published articles
Record created 2020-11-18, last modified 2022-09-11