Control of lateral composition distribution in graded films of soluble solid systems A1-xBx by partitioned dual-beam pulsed laser deposition
Sakai, Joe (Institut Català de Nanociència i Nanotecnologia)
Caicedo Roque, Jose Manuel (Institut Català de Nanociència i Nanotecnologia)
Vales Castro, Pablo (Institut Català de Nanociència i Nanotecnologia)
Padilla-Pantoja, Jessica (Institut Català de Nanociència i Nanotecnologia)
Sauthier, Guillaume (Institut Català de Nanociència i Nanotecnologia)
Catalan, Gustau (Institut Català de Nanociència i Nanotecnologia)
Santiso, José (Institut Català de Nanociència i Nanotecnologia)
Fecha: |
2020 |
Resumen: |
Lateral compositionally-graded thin films are powerful media for the observation of phase boundaries aswell as for high-throughputmaterials exploration. We herein propose amethod to prepare epitaxial lateral compositionally-graded films using a dual-beampulsed laser deposition (PLD)method with two targets separated by a partition. Tuning the ambient pressure and the partition-substrate gap makes it possible to control of the gradient length of the deposits at the small sizes (≤ 10 mm) suitable for commercial oxide single crystal substrates. A simple Monte Carlo simulation qualitatively reproduced the characteristic features of the lateral thickness distribution. To demonstrate this method, we prepared (1-x)PbTiO-xPbZrO and (1-x)LaMnOLaSrMnO films with lateral composition gradient widths of 10 and 1 mm, respectively, with the partitioned dual PLD. |
Ayudas: |
Ministerio de Economía y Competitividad MAT2016-77100-C2-1-P Ministerio de Economía y Competitividad SEV-2017-0706
|
Nota: |
Altres ajuts: AGAUR agency (project 2017SGR) |
Derechos: |
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original. |
Lengua: |
Anglès |
Documento: |
Article ; recerca ; Versió publicada |
Materia: |
Pulsed laser deposition ;
Compositionally-graded film ;
Morphotropic phase boundary ;
Monte Carlo method ;
Piezoelectric material ;
Perovskite type manganite |
Publicado en: |
Coatings, Vol. 10, issue 6 (June 2020) , art. 540, ISSN 2079-6412 |
DOI: 10.3390/COATINGS10060540
El registro aparece en las colecciones:
Documentos de investigación >
Documentos de los grupos de investigación de la UAB >
Centros y grupos de investigación (producción científica) >
Ciencias >
Institut Català de Nanociència i Nanotecnologia (ICN2)Artículos >
Artículos de investigaciónArtículos >
Artículos publicados
Registro creado el 2020-11-18, última modificación el 2022-09-11