Microbial electrosynthesis of acetate from CO2 in three-chamber cells with gas diffusion biocathode under moderate saline conditions
Dessì, Paolo (Universitat de Girona. Institut de Medi Ambient)
Buenaño-Vargas, Claribel (University of Galway. Microbiology Department)
Martínez-Sosa, Santiago (University of Galway. Ryan Institute)
Mills, Simon (University of Galway. Microbiology Department)
Trego, Anna (University of Galway. Microbiology Department)
Ijaz, Umer Z. (University of Glasgow. School of Engineering)
Pant, Deepak (Flemish Institute for Technological Research)
Puig, Sebastià (Universitat de Girona. Institut de Medi Ambient)
O'Flaherty, Vincent (University of Galway. Microbiology Department)
Farràs Costa, Pau (University of Galway. Ryan Institute)

Data:	2023
Resum:	The industrial adoption of microbial electrosynthesis (MES) is hindered by high overpotentials deriving from low electrolyte conductivity and inefficient cell designs. In this study, a mixed microbial consortium originating from an anaerobic digester operated under saline conditions (∼13 g L-1 NaCl) was adapted for acetate production from bicarbonate in galvanostatic (0. 25 mA cm-2) H-type cells at 5, 10, 15, or 20 g L-1 NaCl concentration. The acetogenic communities were successfully enriched only at 5 and 10 g L-1 NaCl, revealing an inhibitory threshold of about 6 g L-1 Na+. The enriched planktonic communities were then used as inoculum for 3D printed, three-chamber cells equipped with a gas diffusion biocathode. The cells were fed with CO2 gas and operated galvanostatically (0. 25 or 1. 00 mA cm-2). The highest production rate of 55. 4 g m-2 d-1 (0. 89 g L-1 d-1), with 82. 4% Coulombic efficiency, was obtained at 5 g L-1 NaCl concentration and 1 mA cm-2 applied current, achieving an average acetate production of 44. 7 kg MWh-1. Scanning electron microscopy and 16S rRNA sequencing analysis confirmed the formation of a cathodic biofilm dominated by Acetobacterium sp. Finally, three 3D printed cells were hydraulically connected in series to simulate an MES stack, achieving three-fold production rates than with the single cell at 0. 25 mA cm-2. This confirms that three-chamber MES cells are an efficient and scalable technology for CO2 bio-electro recycling to acetate and that moderate saline conditions (5 g L-1 NaCl) can help reduce their power demand while preserving the activity of acetogens.
Ajuts:	Agència de Gestió d'Ajuts Universitaris i de Recerca 2021/SGR-01352 European Commission 101029266 European Commission 101000441
Drets:	Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, i la comunicació pública de l'obra, sempre que no sigui amb finalitats comercials, i sempre que es reconegui l'autoria de l'obra original. No es permet la creació d'obres derivades.
Llengua:	Anglès
Document:	Article ; recerca ; Versió publicada
Matèria:	Acetobacterium ; Bioelectrochemical system ; Conductivity ; Electrochemical cell design ; Gas diffusion electrode
Publicat a:	Environmental science and ecotechnology, Vol. 16 (October 2023) , art. 100261, ISSN 26664984

DOI: 10.1016/j.ese.2023.100261
PMID: 37089695

10 p, 4.1 MB

Supplementary data 7 p, 548.3 KB

El registre apareix a les col·leccions:
Articles > Articles de recerca
Articles > Articles publicats