Environmental assessment of a new building envelope material derived from urban agriculture wastes : the case of the tomato plants stems
Llorach-Massana, Pere ![ORCID Identifier](/img/uab/orcid.ico)
(Universitat Autònoma de Barcelona. Institut de Ciència i Tecnologia Ambientals)
Cirrincione, Laura (Università degli Studi di Palermo. Department of Engineering)
Sierra-Perez, Jorge (Universidad de Zaragoza. Departamento de Ingeniería de Diseño y Fabricación)
Scaccianoce, Gianluca ![ORCID Identifier](/img/uab/orcid.ico)
(Università degli Studi di Palermo. Department of Engineering)
La Gennusa, Maria ![ORCID Identifier](/img/uab/orcid.ico)
(Università degli Studi di Palermo. Department of Engineering)
Peña, Javier (Escola Universitària de Disseny i Enginyeria de Barcelona)
Rieradevall, Joan
(Universitat Autònoma de Barcelona. Departament d'Enginyeria Química, Biològica i Ambiental)
Date: |
2023 |
Abstract: |
Purpose: Decarbonizing cities is one of today's biggest challenges. In this regard, particular attention has been paid on improving the environmental performance of buildings. In this framework, this work consists in assessing the environmental impact of an innovative building envelope component derived from urban agriculture (UA) wastes. In fact, rooftop UA seems to be a possible solution to the rising food demand due to increasing urban demographic growth. Consequently, rooftop UA wastes need to be treated in sustainable ways. Methods: This study aims to determine the carbon footprint and embodied energy of a new infill wall material, derived from UA wastes produced by a building rooftop greenhouse tomato crop, and evaluate the potential biogenic carbon that such by-product could fix temporally until its end of life. After an initial description of the manufacturing process of the new material, its carbon footprint and embodied energy have been calculated by means of the life cycle assessment (LCA) methodology according to the ISO 14044 and the ISO 14067 guidelines adapted to the analyzed context. In particular, the inventory analysis is based on data collected from the production of samples of the new material at the laboratory scale. Results and discussion: The results of the LCA indicate that, when the biogenic carbon fixed in the UA wastes is considered, a negative carbon footprint of − 0. 2 kg CO2 eq. per kg of material can be obtained. Hence, it can be assumed that from a life cycle perspective the material is able to fix carbon emissions instead of emitting them. Specifically, for the considered scenario, approximately 0. 42 kg CO2 eq. /m2 per year could be sequestered. However, the crop area required to produce enough waste to manufacture a unit of material is quite high. Therefore, future studies should focus on individuate solutions to reduce the density of the new component, and also different urban crops with higher waste production rates. Conclusions: The outcomes of the study put in evidence the potential of the new proposed infill wall component in fixing carbon emissions from UA, allowing to also compensate those relating to the production and transportation stages of the component life cycle. Moreover, producing by-products with UA wastes, hence temporally storing the carbon fixed by crops, may contribute to reduce the carbon cycles speed conversely to traditional waste management solutions, other than lower new raw materials depletion. |
Grants: |
Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-1683 Ministerio de Economía y Competitividad CTM2013-17-47067-C2-1-R
|
Note: |
Unidad de excelencia María de Maeztu CEX2019-000940-M |
Rights: |
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original. ![Creative Commons](/img/licenses/by.ico) |
Language: |
Anglès |
Document: |
Article ; recerca ; Versió acceptada per publicar |
Subject: |
Biogenic carbon ;
Carbon footprint ;
Embodied energy ;
Infill wall material ;
Innovative building envelope components ;
LCA ;
Urban agriculture wastes |
Published in: |
The international journal of life cycle assessment, (March 2023) , ISSN 1614-7502 |
DOI: 10.1007/s11367-023-02152-2
The record appears in these collections:
Research literature >
UAB research groups literature >
Research Centres and Groups (research output) >
Experimental sciences >
Institut de Ciència i Tecnologia Ambientals (ICTA) >
Sustainability and Environmental Protection (Sostenipra)Articles >
Research articlesArticles >
Published articles
Record created 2023-04-20, last modified 2023-05-02