Optical and mechanical properties of nanofibrillated cellulose : Toward a robust platform for next-generation green technologies
Delgado Simao, Claudia 
(Institut Català de Nanociència i Nanotecnologia)
Reparaz, Juan Sebastian 
(Institut Català de Nanociència i Nanotecnologia)
Wagner, Markus R.. 
(Institut Català de Nanociència i Nanotecnologia)
Graczykowski, Bartlomiej 
(Institut Català de Nanociència i Nanotecnologia)
Kreuzer, Martin 
(Institut Català de Nanociència i Nanotecnologia)
Ruiz-Blanco, Yasser 
(Institut Català de Nanociència i Nanotecnologia)
García, Yamila (Institut Català de Nanociència i Nanotecnologia)
Malho, Jani-Markus (VTT Technical Research Centre of Finland)
Goñi, Alejandro
(Institut de Ciència de Materials de Barcelona)
Ahopelto, Jouni
(VTT Technical Research Centre of Finland)
Sotomayor Torres, Clivia M.
(Institut Català de Nanociència i Nanotecnologia)
| Fecha: |
2015 |
| Resumen: |
Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. To elucidate the optical and mechanical stability of nanofibrillated cellulose as a standalone platform, herein we report on three main findings: (i) for the first time an experimental determination of the optical bandgap of nanofibrillated cellulose, important for future modeling purposes, based on the onset of the optical bandgap of the nanofibrillated cellulose film at E ≈ 275 nm (4. 5 eV), obtained using absorption and cathodoluminescence measurements. In addition, comparing this result with ab-initio calculations of the electronic structure the exciton binding energy is estimated to be E ≈ 800 meV; (ii) hydrostatic pressure experiments revealed that nanofibrillated cellulose is structurally stable at least up to 1. 2 GPa; and (iii) surface elastic properties with repeatability better than 5% were observed under moisture cycles with changes of the Young modulus as large as 65%. The results obtained show the precise determination of significant properties as elastic properties and interactions that are compared with similar works and, moreover, demonstrate that nanofibrillated cellulose properties can be reversibly controlled, supporting the extended potential of nanofibrillated cellulose as a robust platform for green-technology applications. |
| Ayudas: |
European Commission 628197 Ministerio de Economía y Competitividad MAT-2012-31392
|
| Derechos: |
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, i la comunicació pública de l'obra, sempre que no sigui amb finalitats comercials, i sempre que es reconegui l'autoria de l'obra original. No es permet la creació d'obres derivades.  |
| Lengua: |
Anglès |
| Documento: |
Article ; recerca ; Versió acceptada per publicar |
| Publicado en: |
Carbohydrate polymers, Vol. 126 (August 2015) , p. 40-46, ISSN 0144-8617 |
DOI: 10.1016/j.carbpol.2015.03.032
El registro aparece en las colecciones:
Documentos de investigación >
Documentos de los grupos de investigación de la UAB >
Centros y grupos de investigación (producción científica) >
Ciencias >
Institut Català de Nanociència i Nanotecnologia (ICN2)Artículos >
Artículos de investigaciónArtículos >
Artículos publicados
Registro creado el 2023-07-03, última modificación el 2024-12-04