Nanostructure Tuning of Gold Nanoparticles Films via Click Sintering
Urban, Massimo ![Identificador ORCID](/img/uab/orcid.ico)
(Institut Català de Nanociència i Nanotecnologia)
Rosati, Giulio ![Identificador ORCID](/img/uab/orcid.ico)
(Institut Català de Nanociència i Nanotecnologia)
Maroli, Gabriel ![Identificador ORCID](/img/uab/orcid.ico)
(Institut Català de Nanociència i Nanotecnologia)
Della Pelle, Flavio ![Identificador ORCID](/img/uab/orcid.ico)
(Institut Català de Nanociència i Nanotecnologia)
Bonini, A ![Identificador ORCID](/img/uab/orcid.ico)
(Institut Català de Nanociència i Nanotecnologia)
Sajti, Laszlo (RHP Technology GmbH)
Fedel, Mariangela (RHP Technology GmbH)
Merkoçi, Arben
(Institut Català de Nanociència i Nanotecnologia)
Data: |
2023 |
Resum: |
Colloidal metal nanoparticles dispersions are commonly used to create functional printed electronic devices and they typically require time-, energy- and equipment-consuming post-treatments to improve their electrical and mechanical properties. Traditional methods, e. g. thermal, UV/IR, and microwave treatments, limit the substrate options and may require expensive equipment, not available in all the laboratories. Moreover, these processes also cause the collapse of the film (nano)pores and interstices, limiting or impeding its nanostructuration. Finding a simple approach to obtain complex nanostructured materials with minimal post-treatments remains a challenge. In this study, a new sintering method for gold nanoparticle inks that called as "click sintering" has been reported. The method uses a catalytic reaction to enhance and tune the nanostructuration of the film while sintering the metallic nanoparticles, without requiring any cumbersome post-treatment. This results in a conductive and electroactive nanoporous thin film, whose properties can be tuned by the conditions of the reaction, i. e. , concentration of the reagent and time. Therefore, this study presents a novel and innovative one-step approach to simultaneously sinter gold nanoparticles films and create functional nanostructures, directly and easily, introducing a new concept of real-time treatment with possible applications in the fields of flexible electronics, biosensing, energy, and catalysis. |
Ajuts: |
Ministerio de Economía y Competitividad CEX2021-001214-S European Commission 101008701 Ministerio de Ciencia e Innovación PID2021-124795NB-I00
|
Drets: |
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, i la comunicació pública de l'obra, sempre que no sigui amb finalitats comercials, i sempre que es reconegui l'autoria de l'obra original. No es permet la creació d'obres derivades. ![Creative Commons](/img/licenses/by-nc-nd.ico) |
Llengua: |
Anglès |
Document: |
Article ; recerca ; Versió publicada |
Publicat a: |
Small, (November 2023) , art. 2306167, ISSN 1613-6829 |
DOI: 10.1002/smll.202306167
El registre apareix a les col·leccions:
Documents de recerca >
Documents dels grups de recerca de la UAB >
Centres i grups de recerca (producció científica) >
Ciències >
Institut Català de Nanociència i Nanotecnologia (ICN2)Articles >
Articles de recercaArticles >
Articles publicats
Registre creat el 2024-01-09, darrera modificació el 2024-05-14