Removal of Fe from kaolin using dissimilatory Fe(III)-reducing bacteria
Guo, Min-Rong (Fujian Normal University. School of Chemistry and Materials Science)
He, Qiu-Xiang (Fujian Normal University. School of Chemistry and Materials Science)
Li, Yu-Man (Fujian Normal University. School of Chemistry and Materials Science)
Lu, Xiao-Qiao (Fujian Normal University. School of Chemistry and Materials Science)
Chen, Zu-Liang (Fujian Normal University. School of Chemistry and Materials Science)

Data:	2010
Resum:	LongYan kaolin has a large Fe content which affects the coloring. Bioleaching treatments to remove Fe impurities were conducted here using indigenous dissimilatory Fe(III)-reducing bacteria. The factors that affect bioleaching efficiency include bioleaching time, carbon source, pH, temperature, pulp density, and inoculum density and these were examined. Environmental scanning electron microscopy and X-ray diffraction were used to examine any textural or mineralogical changes at the surface of the kaolin that may have occurred during the bioleaching. Iron impurities in the kaolin were reduced from 0. 88% to 0. 48% with an increase in the natural whiteness index from 60. 8% to 81. 5% after 7 days of bioleaching treatment. A granulometric analysis of dispersed kaolin demonstrated that the bioleaching resulted in a decrease in particle size. The results demonstrated that the bioleaching was very effective at improving the quality of the kaolin, where insoluble Fe(III), either adsorbed to the kaolin surfaces or admixed as amorphous forms, was leached out by micro organisms as water-soluble Fe(II).
Drets:	Aquest material està protegit per drets d'autor i/o drets afins. Podeu utilitzar aquest material en funció del que permet la legislació de drets d'autor i drets afins d'aplicació al vostre cas. Per a d'altres usos heu d'obtenir permís del(s) titular(s) de drets.
Llengua:	Anglès
Document:	Article ; recerca ; Versió publicada
Matèria:	Bioleaching ; Dissimilatory ; Fe(III)-reducing Bacteria ; Iron Impurity ; Kaolin
Publicat a:	Clays and Clay Minerals, Vol. 58, Núm. 4 (2010) , p. 515-521, ISSN 1552-8367

DOI: 10.1346/CCMN.2010.0580406

7 p, 785.9 KB  Accés restringit a la UAB

El registre apareix a les col·leccions:
Articles > Articles de recerca
Articles > Articles publicats