visitant ::
identificació
|
|||||||||||||||
Cerca | Lliura | Ajuda | Servei de Biblioteques | Sobre el DDD | Català English Español |
Pàgina inicial > Articles > Articles publicats > Structural and magnetic properties of FexCu1-x sputtered thin films electrochemically treated to create nanoporosity for high-surface-area magnetic components |
Data: | 2018 |
Resum: | Sputter deposition is a facile and widely used technique for fabricating thin-film materials. Electrochemical dealloying, on the other hand, is a promising method for creating nanoporosity, and therefore increasing surface area, in metallic materials. Surprisingly, little work has been done on the application of electrochemical dealloying to sputter-deposited thin films. Here, we prepare FexCu1-x thin films by sputter deposition to be then electrochemically treated to create porosity. We investigate the structural and magnetic properties of as-sputtered and electrochemically treated films. We find that the morphology, crystal structure, and magnetic properties are highly dependent on initial film composition. For high copper content films (Fe29Cu71), relative Cu content is found to decrease during the dealloying process. For these films, the crystal structure is not greatly affected by the induced porosity and the porous films show increased saturation magnetization. However, for the more Fe-rich compositions (Fe63Cu37), we find that Fe is preferentially lost and making the films nanoporous induces a crystal structure change from body-centered cubic (bcc) to a mixture of face-centered cubic (fcc) and bccphases. These same porous films show a decrease in saturation magnetization and a large increase in coercivity compared to the as-sputtered films. These films are attractive as high-surface-area magnetic components because of the tunability of their magnetic properties and their high surface area due to porosity. To the best of our knowledge, these results constitute the first example of nanoporous, magnetic thin films by prepared by sputtering and subsequent electrochemical treatment. |
Ajuts: | European Commission 648454 Ministerio de Economía y Competitividad MAT2017-86357-C3-1-R Ministerio de Economía y Competitividad MAT2014-57960-C3-1-R Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-292 Ministerio de Economía y Competitividad IJCI-2015-27030 Ministerio de Economía y Competitividad RYC-2012-10839 European Commission 665919 |
Drets: | Tots els drets reservats. |
Llengua: | Anglès |
Document: | Article ; recerca ; Versió acceptada per publicar |
Matèria: | Nanoporous ; Magnetron sputtering ; FeCu ; Magnetic thin films ; Electrochemical dealloying |
Publicat a: | ACS applied nano materials, Vol. 1, Issue 4 (April 2018) , p. 1675-1682, ISSN 2574-0970 |
Postprint 15 p, 1.1 MB |