3d-printed quasi-absolute electromagnetic encoders for chipless-rfid and motion control applications
Paredes Marco, Ferran (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Herrojo, Cristian (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Martín, Ferran (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)

Date:	2021
Abstract:	This paper presents electromagnetic encoders useful for chipless-RFID and motion control applications. The encoders consist in a pair of linear chains of rectangular apertures implemented by means of 3D printing. One of these chains is periodic and acts as a clock, whereas the other chain contains an identification (ID) code. With these two aperture chains, the ID code can be synchronously read, so that the relative velocity between the tag and the reader is irrelevant. Additionally, it is shown in the paper that by properly designing the reader, it is possible to determine the motion direction. The sensitive part of the reader is a microstrip line loaded with three complementary split ring resonators (CSRRs) etched in the ground plane and fed by three harmonic signals. By encoder motion, the characteristics of the local medium surrounding the CSRRs are modified, and the harmonic signals are amplitude modulated (AM) at the output port of the line, thereby providing the clock signal (which gives the encoder velocity), the ID code (providing also the quasi-absolute position) and the direction of motion. A fabricated prototype encoder is characterized by reading it with a dedicated reader.
Grants:	Agencia Estatal de Investigación PID2019-103904RB-I00 Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-1159
Note:	Altres ajuts: Institució Catalana de Recerca i Estudis Avançats, and ERDF funds
Rights:	Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original.
Language:	Anglès
Document:	Article ; recerca ; Versió publicada
Subject:	Chipless-RFID ; Motion control ; Electromagnetic encoders ; 3D-printing ; Dielectric permittivity ; Microstrip technology
Published in:	Electronics, Vol. 10, Num. 10 (May 2021) , art. 1154, ISSN 2079-9292

DOI: 10.3390/electronics10101154

11 p, 1.7 MB

The record appears in these collections:
Research literature > UAB research groups literature > Research Centres and Groups (research output) > Engineering > CIMITEC-UAB
Articles > Research articles
Articles > Published articles