Discussion and analysis of dumbbell defect-ground-structure (DB-DGS) resonators for sensing applications from a circuit theory perspective
Su, Lijuan ![Identificador ORCID](/img/uab/orcid.ico)
(Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Vélez Rasero, Paris ![Identificador ORCID](/img/uab/orcid.ico)
(Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Muñoz Enano, Jonathan ![Identificador ORCID](/img/uab/orcid.ico)
(Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Martín, Ferran (Martín Antolín)
![Identificador ORCID](/img/uab/orcid.ico)
(Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Data: |
2021 |
Resum: |
Microstrip transmission lines loaded with dumbbell defect-ground-structure (DB-DGS) resonators transversally oriented have been exhaustively used in microwave circuits and sensors. Typically, these structures have been modelled by means of a parallel LC resonant tank series connected to the host line. However, the inductance and capacitance of such model do not have a physical meaning, since this model is inferred by transformation of a more realistic model, where the DB-DGS resonator, described by means of a resonant tank with inductance and capacitance related to the geometry of the DB-DGS, is magnetically coupled to the host line. From parameter extraction, the circuit parameters of both models are obtained by considering the DB-DGS covered with semi-infinite materials with different dielectric constant. The extracted parameters are coherent and re-veal that the general assumption of considering the simple LC resonant tank series-connected to the line to describe the DB-DGS-loaded line is reasonable with some caution. The implications on the sensitivity, when the structure is devoted to operating as a permittivity sensor, are discussed. |
Ajuts: |
Agencia Estatal de Investigación PID2019-103904RB-I00 Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-1159 Agencia Estatal de Investigación IJC2019-040786-I
|
Nota: |
Altres ajuts: Secreteraria d'Universitats i Recerca (Generalitat de Catalunya) and European Social Fund FI grant |
Drets: |
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original. ![Creative Commons](/img/licenses/by.ico) |
Llengua: |
Anglès |
Document: |
Article ; recerca ; Versió publicada |
Matèria: |
Slot resonator ;
Dumbbell defect-ground structure (DB-DGS) ;
Microwave sensor ;
Parameter extraction ;
Microstrip technology |
Publicat a: |
Sensors (Basel, Switzerland), Vol. 21, Num. 24 (December 2021) , art. 8334, ISSN 1424-8220 |
DOI: 10.3390/s21248334
PMID: 34960428
El registre apareix a les col·leccions:
Documents de recerca >
Documents dels grups de recerca de la UAB >
Centres i grups de recerca (producció científica) >
Enginyeries >
CIMITEC-UABArticles >
Articles de recercaArticles >
Articles publicats
Registre creat el 2022-02-23, darrera modificació el 2023-10-01