Frequency-Coded and Programmable Synchronous Electromagnetic Encoders Based on Linear Strips
Karami-Horestani, Amirhossein (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Paredes Marco, Ferran (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)
Martín, Ferran (Universitat Autònoma de Barcelona. Departament d'Enginyeria Electrònica)

Data:	2022
Resum:	This letter presents electromagnetic encoders where encoding is achieved by considering four different inclusions, particularly linear strips of different length, etched at the predefined positions of the encoder chain, and transversely oriented with regard to the chain axis. Since the length of the strips determines their resonance frequencies, it follows that the 2-bits per inclusion, corresponding to the four possible different states (strip lengths), are frequency-coded. Thus, the reader is a microstrip line with a series gap fed by four harmonic (carrier) signals tuned to the resonance frequencies of the four considered encoder strips. By encoder motion over the reader, each carrier signal is amplitude modulated, with envelope functions exhibiting a peak each time a strip of the encoder chain tuned to the resonance frequency of the considered carrier signal crosses the axis of the reader line. The functionality of the system is experimentally validated in this letter. It is also shown that the encoders can be programmed by considering identical strips and by cutting them appropriately, according to the desired code. The proposed encoders are intrinsically synchronous. Such encoders are useful for measuring displacements and velocities, as well as for the implementation of synchronous near-field chipless radiofrequency identification tags with sequential bit reading.
Ajuts:	Agencia Estatal de Investigación PID2019-103904RB-I00 Agencia Estatal de Investigación PDC2021-121085-I00 Agència de Gestió d'Ajuts Universitaris i de Recerca 2017/SGR-1159 Agencia Estatal de Investigación PRE2020-093239
Drets:	Aquest material està protegit per drets d'autor i/o drets afins. Podeu utilitzar aquest material en funció del que permet la legislació de drets d'autor i drets afins d'aplicació al vostre cas. Per a d'altres usos heu d'obtenir permís del(s) titular(s) de drets.
Llengua:	Anglès
Document:	Article ; recerca ; Versió acceptada per publicar
Matèria:	Displacement sensors ; Electromagnetic encoders ; Microstrip technology ; Motion control
Publicat a:	IEEE sensors letters, Vol. 6, Issue 8 (August 2022) , ISSN 2475-1472

DOI: 10.1109/LSENS.2022.3193329

Postprint 5 p, 798.5 KB

El registre apareix a les col·leccions:
Documents de recerca > Documents dels grups de recerca de la UAB > Centres i grups de recerca (producció científica) > Enginyeries > CIMITEC-UAB
Articles > Articles de recerca
Articles > Articles publicats