visitant ::
identificació
|
|||||||||||||||
Cerca | Lliura | Ajuda | Servei de Biblioteques | Sobre el DDD | Català English Español |
Pàgina inicial > Articles > Articles publicats > Engineering of Thermoelectric Composites Based on Silver Selenide in Aqueous Solution and Ambient Temperature |
Data: | 2023 |
Resum: | The direct, solid state, and reversible conversion between heat and electricity using thermoelectric devices finds numerous potential uses, especially around room temperature. However, the relatively high material processing cost limits their real applications. Silver selenide (AgSe) is one of the very few n-type thermoelectric (TE) materials for room-temperature applications. Herein, we report a room temperature, fast, and aqueous-phase synthesis approach to produce AgSe, which can be extended to other metal chalcogenides. These materials reach TE figures of merit (zT) of up to 0. 76 at 380 K. To improve these values, bismuth sulfide (BiS) particles also prepared in an aqueous solution are incorporated into the AgSe matrix. In this way, a series of AgSe/BiS composites with BiS wt % of 0. 5, 1. 0, and 1. 5 are prepared by solution blending and hot-press sintering. The presence of BiS significantly improves the Seebeck coefficient and power factor while at the same time decreasing the thermal conductivity with no apparent drop in electrical conductivity. Thus, a maximum zT value of 0. 96 is achieved in the composites with 1. 0 wt % BiS at 370 K. Furthermore, a high average zT value (zT) of 0. 93 in the 300-390 K range is demonstrated. |
Ajuts: | Agencia Estatal de Investigación CEX2021-001214-S Agència de Gestió d'Ajuts Universitaris i de Recerca 2021/SGR-00457 Agència de Gestió d'Ajuts Universitaris i de Recerca 2021/SGR-01061 Agencia Estatal de Investigación PID2020-116093RB-C43 Ministerio de Ciencia e Innovación PID2021-124572OB-C31 |
Drets: | Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original. |
Llengua: | Anglès |
Document: | Article ; recerca ; Versió publicada |
Publicat a: | ACS applied electronic materials, (May 2023) , ISSN 2637-6113 |
9 p, 5.4 MB |